Operating instructions

Note: The aspect ratio setting is ignored when Pixel-to-Pixel mode is enabled.

■

Pixel-to-Pixel

Use this setting to enable Pixel-to-Pixel mode.

This Pixel-to-Pixel mode bypasses the monitor’s internal scaling function and displays incoming images in their native

resolution and aspect ratio, with a one-to-one mapping:

• For incoming formats smaller than the native resolution of the LCD panel, the image will be displayed in the center of

the screen using only the necessary LCD pixels. For example, NTSC images will occupy exactly 720 x 480 pixels. The

surrounding pixels will be black.

Note: Pixel-to-Pixel mode disables aspect ratio control and H/V Delay.

MARKER CONFIGURATION SUBMENU

Use the Video Configuration submenu to select various video settings such as monochrome mode or blue-only mode.

■

Marker Enable

Marker Configuration Submenu