Operating instructions

12
On-Screen Menu (continued)
■
NTSC Black Level
Set the NTSC Black Level according to the type of NTSC composite video input:
• 7.5 IRE: Use this setting for standard NTSC-M signals which use a 7.5 IRE setup (black level).
• 0 IRE: Use this setting for NTSC-J signals which have no setup, or a black level of 0 IRE.
Note: This setting is disabled for PAL composite input and all component/3G-SDI formats.
MARKER CONFIGURATION SUBMENU
■
Markers
Use this setting to enable or disable all on-screen markers. This setting affects the center marker, full screen markers,
16:9 markers, and 4:3 markers.
■
Center Marker
Use this setting to display a center marker on the screen.
■
16:9 Markers
Use these settings to superimpose one of the selectable markers on the screen when in 16:9 ratio mode.
• Off (no marker)
• 4:3
• 13:9
• 14:9
• 1.85:1
• 2.35:1
• 95% Safe
• 93% Safe
• 90%Safe
• 88% Safe
• 85% Safe
• 80% Safe
• User
Marker Configuration Submenu