Model V-LCD70-AFHD Operating Instructions 1
This page intentionally left blank 2
Table of Contents Top and Front Panel Features ............................................................................................................................6 Rear Panel Features............................................................................................................................................7 Compatible Input Formats..................................................................................................................................
■ Included Accessories Carefully unpack the V-LCD70-AFHD monitor and verify that the following items are included: • V-LCD70-AFHD Monitor • 12V 1.5A XLR Power Supply Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental United States, call +1 (310) 3330606.
Top and Front Panel Features Power Switch This power switch controls power to the monitor from the DC Power Connector or the custom Battery Adaptor. The monitor will always attempt to draw power from the DC connector first if both the DC Power Connector and a Battery are installed simultaneously. This switch turns the panel on or off. Function Buttons Two user-definable function buttons can be used for direct access to various settings. Functions are assigned using the onscreen menu.
Rear Panel Features Power Connector (XLR) Insert the included XLR Power Supply end here. Power can be supplied from the included power supply or from a variety of DC sources supplying the appropriate voltage. Power Connector (Coax) Additional connector for Coaxial Power Supplies. Insert the coax end here, and tighten the locking nut for additional protection from the cord being accidentally unplugged. If using a third party power supply, it should have a 5.5mm OD x 2.0mm ID.
Compatible Input Formats Composite (Video) NTSC PAL Component (YPbPr) 720p/50, 59.94, 60 1080p/23.98, 24, 25, 29.97, 30 1080i/50,59.94,60 HDMI 720p/50,59.94,60 1080p/23.98, 24, 25, 29.97, 30 1080i/50,59.94,60 1080p/50,59.94,60 3G-SDI 480i, 576i 720p/50,59.94,60 1080p/23.98, 24, 25, 29.97, 30 1080i/50,59.94,60 1080p/50,59.
MAIN MENU AND NAVIGATION Access and navigate the main menu using the Menu button on the keypad: Using the Menu buttons • • • • Press the MENU button to enter the main menu. Use the and buttons to scroll through the main menu or each submenu. Press the and button to enter a submenu or choose a setting. Press the MENU button to exit the main menu, or return to the main menu from a submenu.
Color TempG Color TempB Picture Mode Standard (Contrast, Brightness, Saturation and Tint = 50) Soft (Contrast = 40, Brightness, Saturation = 45) User (User Defined settings) Vivid (Contrast = 60, Brightness = 55, Saturation = 75) Aspect Ratio Full Screen (Image is scaled across the entire screen) 4:3 (Image is displayed in a 4:3 aspect ratio) 16:9 (Image is displayed in a 16:9 aspect ratio) 14:9 (Image is displayed in a 14:9 aspect ratio) Zoom1 (Scale 45% of the image across the entire screen) Zoom2 (Scale
Standard (Normal image display) Overscan (Displays 95% of the image to avoid showing ancillary data “artifacts”) Underscan (Displays all available image data, including ancillary data “artifacts”) Volume (0 – 100 , 50 = Default) Balance (-10 - +10 , 0 = Default) Audio Meter (Displays an audio meter with the first two channels of available audio) Setting Submenu Image Flip (Flip image display) V (Flips the entire image vertically) H (Flip the entire image horizontally) V/H (Flip the image vertically and hor
OSD Submenu Horizontal Position (0-10, 5 = Default) Vertical Position (0-10, 5 = Default) Horizontal Size (0,3,5,7,10, 5 = Default) Vertical Size (0,3,5,7,10, 5 = Default) OSD Horizontal Position (0-100, 50 = Default) OSD Vertical Position (0-100, 50 = Default) Menu Transparency (0-10, 0 = Default) OSD Timeout (5 sec,10 sec,15 sec,60 sec, 5 sec = Default ) 12
Specifications ■ PANEL Screen Size Display Area (h x v) Pixels Brightness Contrast Ratio ■ 7” Diagonal 153.6 x 90 mm 1024 x RGB x 600 500 cd/m2 700:1 CONNECTORS HDMI Video Input 1 x HDMI Female Receptacle Stereo Headphone Jack 1/8” (3.
Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro-fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended.
This page intentionally left blank 15
1910 East Maple Ave. El Segundo, CA 90245 Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688 www.LCDRacks.com • sales@lcdracks.
