Operating instructions

6
Front and Side Monitor Features
Power Button
Use the power button to toggle between ON and
STANDBY modes. In the STANDBY state, the LED
on the button will illuminate bright green. In the ON
state, the LED will dimly illuminate green.
Input Select Button
Use the Input button to select VIDEO, YPbPr, and
HDMI inputs. Each press of the button will cycle the
input in order. Video standards and formats
(NTSC/PAL, etc.) are automatically detected.
User-Definable Function Buttons
Four user-definable function buttons can be used for
direct access to various settings. Functions are
assigned using the on-screen menu.
Menu Navigation Buttons
Use the Menu, ▲, ▼, and Select buttons to display
and navigate the on-screen menu.
Image Adjustment Knobs
Use the image adjustment knobs to adjust
brightness, color saturation, and contrast of the
image. The status of each image adjustment
parameter is shown on the bottom left of the screen,
with values ranging from 0 to 100. Default value is
50. Tint will adjust the hue of Composite inputs only.
Power Switch
Use the hard power switch to supply power to the
monitor, and choose the input from which the
monitor draws power. The upper switch position
uses the battery adapter, the lower switch position
uses the XLR input, and the center position is OFF.
Battery life can be preserved by setting this switch to
the OFF position when the monitor is not in use.
Service Connector
This connector is for upgrading of the V-
LCD651STX monitor. Please contact Marshall
Electronics for more information.