User Manual

7
Rear Monitor Features
HDMI Input
The V-LCD51 has a single HDMI input. Signal
formats and frame rates are automatically detected
and displayed on the screen.
Power Switch
Use the hard power switch to supply power to the
monitor. The power switch draws power from either
the 5 VDC input or the battery compartment. If both
power inputs are live, the monitor will draw power
from the 5 VDC input to preserve battery life.
Battery life can also be preserved by setting this
switch to the OFF position when the monitor is not in
use.
Power Input
Connect 5VDC to the coax power input connector.
Power can be supplied from the included power
supply, or from a variety of DC sources supplying at
least 1 Amp at 5 Volts.
IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:
Battery Attachment Area
The V-LCD51 can be powered by an assortment of
professional camera batteries. This area is the
mounting location for the different battery plates.
¼-20 Mounting Hole
Use the ¼-20 mounting hole to attach the monitor to
a camera or variety of mounting devices.