User Manual

16
Transparency (Opacity)
Use this seng to selec he transparency o he marker background. Choose between 0% (black) , 25%, 50%, 75% and
100% (see through) transparency.
Filters Submenu
Use the Filters Submenu to enable various modes.
Check Field
Use the check field modes for monitor calibraon or to analyze individual color components of an image. In Monochrome
mode, all color is disabled and only a grayscale image is shown. In Blue, Green, and Red check field modes, only the selected
color will be shown.
Use the following procedure when calibrang the monitor to SMPTE color bars with the following procedure:
1. Allow the monitor to warm up for at least 5-10 minutes.
2. Display SMPTE split-field color bars on the monitor using an
external source.
3. Enable Mo nochrome mode.
4. Locate the pluge paern (super black, black, and gray bars) a he lower-right corner o he screen. Adjus he
Brightness knob unl there is no visible difference between the super black and black bars, bu he gray bar is sll
visible.
5. Adjus he Contrast knob unl an even grayscale appears along the top bars.
6. Disable Monochrome mode.