Operating instructions

5
Monitor Front
 [Power]
Turn the monitor off or on by pressing the power
button. The LED on the power button is at full
illumination when the monitor is OFF.
 [Ch. 1-4 ] Channel Select
Pressing Ch. 1, Ch. 2, Ch. 3 or Ch.4 will select
HDSDI Video Inputs 1, 2, 3 or 4. This also
switches the monitor to full screen mode.
 [Layout]
Switches the monitor between Quad Modes and
Dual Layout.
 [DVI-I]
Selects DVI-I input as the video source for Ch. 4.
This replaces the HDSDI input on Ch. 4. When
activated, the LED will light on the DVI-I button.
 [F1 , F2]
Two user-definable function buttons can be used
for direct access to various settings. Functions
are assigned using the on-screen menu.
 [RotoMenu ™ ]
The RotoMenu ™ knob allows for accessing
and navigating the main menu, using only a
single knob. See page 10: Menu and
Navigation .
 [BRIGHT, COLOR , CONTRAST]
The BRIGHT, COLOR and CONTRAST knobs
function as Image Adjustment knobs. The status
of each image adjustment parameter is shown on
the top left of the screen, with values ranging
from 0 to 100. Pressing a knob once displays the
current value. Pressing a knob twice resets the
corresponding adjustment to the default setting.
Adjusting the knobs while in any of the Quad
layouts will adjust either the Main or Window 1
channel.
(
POWER
)
Button
(Ch. 1
–
Ch. 4)
Channel Select
(Quad) Layout
(F1
-
F2)
Function
Buttons
DVI-I
RotoMenu
(BRIGHT
–
COLOR
–
CONTRAST)
Image Adjustment
Buttons