Operating instructions

24
Specifications
■
PANEL
Screen Size 17.0” Diagonal
Display Area (h x v) 367.20 x 229.50 mm
Aspect Ratio 16:10 Native
Pixels 1920 x RGB x 1200
Viewing Angle (h x v) 140° x 120°
Brightness 330 cd/m
2
Contrast Ratio 500:1
Pixel Pitch (h x v) 0.191mmx 0.191mm
Burn-In Warning
The QV171X-HDSDI uses a high quality TFT LCD
panel. However, if a static image is left on the screen for
48 hours, there may be a 10 to 20 minute recovery
period for the panel. During recovery, a very faint image
may be retained on the display. Put up a white curtain
for 30 minutes to eliminate the retained image.
■
VIDEO INPUT/OUTPUT
HD-SDI Input / Output
Supports ITU-R BT.656, SMPTE 259M, 292M, 274M
DVI-I Video/VESA input
■
CONNECTORS
HD-SDI Video Input
4 x BNC Female (75 Ω)
HD-SDI Video Output (Active Loop-Through)
4 x BNC Female (75 Ω)
DVI-I Video/VESA input
1 x DVI-I Female connector
Power Input
2-Pin Twist Lock Connector
Tally Hardware Interface
HD-15 Female
RS-422/485 Interface
2 x RJ12 (Modular 6P6C)
■
TALLY HARDWARE INTERFACE (HD-15)
Activation requires contact closure of pin to ground on
the HD-15 connector:
Pin No. Signal
1 Channel 1 Green
2 Channel 1 Red
3 Channel 1 Yellow
4 Ground
5 Channel 4 Green
6 Channel 2 Green
7 Channel 2 Red
8 Channel 2 Yellow
9 Ground
10 Channel 4 Red
11 Channel 3 Green
12 Channel 3 Red
13 Channel 3 Yellow
14 Ground
15 Channel 4 Yellow
■
RS-422/485 SERIAL INTERFACE (RJ12)
Protocols: Image Video, TSL v4.0, MEI
Pin No. Signal
1 Tx-
2 Ground
3 Rx+ (Receive from host)
4 Rx- (Receive from host)
5 N/C
6 Tx+
■
ELECTRICAL
Power Consumption 48 W
Voltage Requirement 12 VDC
V-PS12-5V-1 Power Supply:
Input 100V-240V, 1.5A, 50-60Hz
Output 12VDC, 5A, 60W Max
■
MECHANICAL
Dimensions (w x h x d): 18.9” x 10.45” x 1.40”
Weight (with rack ears): 7.48 lbs
Operating Temperature 32°F to 120°F (0°C to 40 °C)
Storage Temperature -4°F to120°F (-20°C to 50°C)
Compliance Œ, FCC-Class A, ANSI-63.4
(Certificates on file)
RoHs Do not dispose. Return to Manufacturer or Authorized Recycle Facility.