Operating instructions

23
■
IMD Fixed String
Use this setting to display static IMD text on the screen. This setting is used to enter IMD text locally, when a
serial protocol is not used for remote control. The IMD Fixed String is saved after power cycle. The IMD Fixed
String will be overridden by serial protocol commands.
Press RotoMenu™ knob to edit the IMD Fixed String. Rotate the RotoMenu™ knob to move the cursor. Press the
RotoMenu™ knob with the cursor on the character to be changed, then rotate the knob to scroll through the
character set . Press the RotoMenu™ knob to choose a character. The '¬' character indicates an unused (NULL)
value in the string. The string entered will be terminated by the first '¬'. Characters to the right of a '¬' character will
be displayed in the menu, but will not be shown in the IMD string.
By exiting the edit field in a particular IMD Name or IMD Fixed String field, you are confirming the changes you
have made. Before confirming a change, you have the ability to cancel any changes you have made by
highlighting the Red Cancel icon next to the name of the field you are editing. This will return your IMD Name or
IMD Fixed String back to the last confirmed values.
Service Submenu
■
Software Version Display
The Main Board, Keypad, and FPGA software version numbers are displayed.
.
The following information is displayed:
• Rel: Software Release version
• Ima: A/B Input Module version
• Ipa: Image Processor version
• Ipap: Image Processor model number
• Fc: Combiner FPGA version
• Fcp: FPGA model number
• Kp: Keypad version number
• Imc: C/D Input Module version
• Ipc: Image Processor version
• Ipcp: Image Processor model number
• Fp: Packet Decoder FPGA version
Service Menu
Please contact Marshall Electronics to ensure
you have the latest software version available.