Operating instructions

■

IMD Name (S/N)

Use this setting to assign a name to each screen when using the Image Video or Marshall-IV protocols. The IMD

name is equivalent to the Image Video serial number and is used by the Image Video controlling device

to identify each screen. The default IMD Name(S/N) is “M00000.” It is recommended to maintain this naming

scheme in order to avoid serial number conflicts with other Image Video devices on the same serial bus. Each

name can be up to 16 ASCII characters.

Press RotoMenu™ knob to edit the IMD Name. Rotate the RotoMenu™ knob to move the cursor. Press the

RotoMenu™ knob with the cursor on the character to be changed, then rotate the knob to scroll through the

character set . Press the RotoMenu™ knob to choose a character.

By exiting the edit field in a particular IMD Name or IMD Fixed String field, you are confirming the changes you

have made. Before confirming a change, you have the ability to cancel any changes you have made by

highlighting the Red Cancel icon next to the name of the field you are editing. This will return your IMD Name or

IMD Fixed String back to the last confirmed values.

■

IMD Tally Mode

Use this setting when using Image Video tally control. Choose one of the following settings, in conjunction with

the Image Video controlling device. T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1-. Consult Image Video

documentation for further information.

IMD Fixed Configuration Submenu

■

IMD Fixed Color

Use this setting to choose the color of the IMD Fixed String text (see below). Available colors are red, green,

and yellow. This setting does not affect text color when using IMD text via the Image Video or TSL v4.0

protocols (text color is set via the protocols).

■

IMD Fixed Align

Use this setting to choose the horizontal alignment of the IMD text. IMD text can be justified on the left, center

or right of the screen. This setting is overridden when using IMD text via the Image Video protocol (alignment is

set via Image Video protocol).