Operating instructions

17
• Use the LOAD CONFIG menu to load one of presets USR1 – USR6. Factory default settings can also be
loaded by selecting MFG. (Factory defaults cannot be overwritten.)
• Use the SAVE CONFIG menu to save the current settings to a preset from USR1- USR6.
Full System Restore
Use To perform a full system restore, which resets ALL adjustable fields on the monitor to their “fresh-from-
factory” state, press the Power, F1 and F2 button simultaneously. Note: You will lose ALL user adjustable
settings on your monitor.
OSD Configuration Submenu
■
IMD State
Use this setting to turn the IMD text display on or off. This setting affects both fixed string IMD text and remote
IMD text commands
■
Status Display
Use this setting to enable or disable status display. When enabled, the current video input standard is displayed
on the top left of the screen. When disabled, status is only displayed for 2 seconds when the monitor is powered
on, when an input is applied, or when the input video standard changes. The status display reads “No Input”
when no video input is present.