Operating instructions

12
To turn the Group Link option on from the above state, simply press the RotoMenu knob. The Group Link Icon will
change from a broken Group Link icon to a completed Group Link icon, as shown below:
The completed Group Link icon indicates that any change that you make to an individual channel, as shown section
before this, will be applied to all other channels. To turn this off, simply highlight the Group Link icon again and
press the RotoMenu knob.
All Submenu options that can be Group Linked will be referenced with a throughout these Operating
Instructions.
Video Configuration Submenu
■
Monochrome Mode
Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale
picture.
■
Blue-Only Mode
Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image,
switching off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars
with the following procedure:
1. Allow the monitor to warm up for at least 5-10 minutes.
Video Configuration Submenu