Operating instructions

11
Your current position in the menu is indicated by the green highlight. When you have highlighted the particular
channel you would like to modify, press the RotoMenu knob. The box you have selected will change, indicating
that this channel is now your choice to be modified, as shown below:
To apply a change to the particular channel, turn your RotoMenu left or right after you have selected a channel (the
channel is highlighted in red). If the item you have chosen is active, an X will appear in the chosen channel check
box. If the setting is inactive, the check box will be empty.
To move away from modifying an individual channel, simply press the RotoMenu button again. When the channel
box is highlighted green again, you will know you are free to acess any other channel or option.
Group Changes / Link Option
The RotoMenu also allows for changes to input Channels as a group, known as Group Linking. If a menu item can
be applied to multiple channels, the group link option will be shown as follows:
In this image, the Monochrome option in the Video Config submenu is being accessed. By turning the RotoMenu
left and right, the Back arrow, Group Link icon and each of the four individual channels can be accessed. The
green highlight indicates your current position in the menu. In this case, the current RotoMenu position is over the
Group Link icon.