Manual

Page 30 of 36
CLIPGUIDE SUBMENU
■ CLIPGUIDE
Use this menu to turn the ClipGuide function On or Off.
■ Mode
Allows the choice of which ClipGuide function you want
to display. There are 6 modes to choose from:
• Luma (Y) displayed over Color Video
• Luma (Y) displayed over Mono Video
• Chroma (C) displayed over Color Video
• Chroma (C) displayed over Mono Video
• Luma (Y) and Chroma (C) displayed over Color Video
• Luma (Y) and Chroma (C) displayed over Mono Video
■ Display Type:
ClipGuide will display over and under values in two ways when monitoring the video signal. In the Zebra
mode, over and under conditions are indicated in a Zebra (diagonal stripe) pattern. In the Fill mode,
over and under conditions are indicated by a solid fill. In either Zebra or Fill mode, Red is the indication
for Luma and Yellow is the indication for Chroma.
■ Y and C LIMITS:
These values are shared with WFM settings
 Y Limits :
Set luminance upper and lower limits to be monitored.
 Limits are displayed in IRE unit
 Varies between -7.3 IRE and 109.1 IRE
 This value will be shown in WFM window as red line
 Any data exceeding these values will be displayed as red on the picture
 These values are shared with WFM settings
 Internally, Y values ranges from 0 to 255
 -7.3 IRE equals to 0 in digital
 0 IRE equals to 16 in digital
 100 IRE equals to 235 in digital
 109.1 IRE equals to 255 in digital
 C Limits:
Sets the chrominance levels to be monitored.
 Displayed in 8-bit digital video representation
 Any data exceeding these values will be displayed as Yellow in the picture
 The factory preset for C limits are 16 and 240 according to ITU-R BT.709
 Typically these values should not be exceeded during normal video production
Page 7 of 36
Features
High Resolution 9.0” Panel
The OR-901-XDI features an all-digital 8-bit, 960 x 540 resolution panel chosen to allow monitoring of
HD 1920 x 1080 video formats without scaling artifacts. The LCD panel features a nominal brightness
of 320 cd/m2 and a contrast ratio of 1000:1 making this display ideal in a variety of environments and
lighting conditions.
Input Cross Conversion
The OR-901-XDI has a fully automatic built in signal converter that performs the following conversions:
 HDSDI to HDMI (with embedded audio if present)
 HDMI to HDSDI (with embedded audio if present)
 Component HD to SDI
Waveform Monitor Function
The built-in waveform monitor (which includes adjustable White
and Black clip level indicators) can be displayed in various
aspect ratios, positions, and transparency options. The
Waveform Monitor can display luminance only or YUV in
Parade format, It can also warn the user for out-of-range
conditions such as overexposure or “blacker-than-black” errors
with fully user-adjustable upper and lower limits.
Real-Time Color Vectorscope
The built-in Vectorscope allows users to monitor color gamut
range in real time. It displays in full color and can also be
displayed in various sizes, positions, and transparency options.
The Vectorscope has adjustable gain from 1x to 5x.
3D Production Tools
The ORCHID series now includes 3D production tools including
four Anaglyph 3D modes as well as five 3D analytic views. In
order to make use of 3D features the input source must be
formatted as Single Channel, Side by Side, Half Horizontal view.
3D Side by Side View
3D Luminance Difference View
3D Anaglyph Color View