Manual

Page 6 of 36
Product Overview
The Orchid OR-901-XDI is a single 9.0” fully featured camera-top and video assist monitor system. The
OR-901-XDI offers built-in fully automatic HDSDI to HDMI & HDMI to HDSDI Cross Conversion, Multiple
modes of Anaglyph 3D production tools, Waveform Monitor, Vectorscope, Audio Bars, Built in Speaker
with audio outputs, and several diagnostic tools. This monitor is ideal for use as a camera top or camera
assist monitor. The OR-901-XDI is equipped with two 3G/HD/SD-SDI inputs as well as analog
Composite (CVBS) Component (Y, Pb, Pr) S-Video (Y, C) and HDMI inputs with switched or cross
converted HDSDI and HDMI outputs allowing a single HDMI camera output to feed both the HDMI input
on the OR-901-XDI while simultaneously feeding an HDSDI signal to additional video assist equipment
or conversely an HDSDI input to be converted to feed additional HDMI equipment. Diagnostic tools
include our exclusive ClipGuide feature, 16 Tri-Color Audio Bar Graph meters with peak hold and
numeric display of headroom and peak levels, and real-time analysis of color space conversion gamut
errors. Other standard features include factory calibrated screen, easy-to-navigate onscreen menus with
RotoMenu control, 9 assignable function keys, adjustable color temperature, aspect ratio settings, a
variety of screen markers, blue-only mode, monochrome mode, H/V delay, and 7 assignable GPI inputs.
Page 31 of 36
USER ASSIGN SUBMENU
■ F-1 thru F-9:
There are nine Function Keys and One Rotary
Encoder on the front panel of the OR-901-XDI. Each
of these F-keys may be assigned to any one of 31
different functions as required by the job or individual
user.
These functions are listed in the USER ASSIGN
section of the Menu Overview section of this manual.
There are three types of User Assigned Functions:
One-way functions:
 Pressing the assigned key will activate the feature
o When it is enabled, the indicator of the key will illuminate
o Pressing again will have no effect
FOR EXAMPLE: Selecting an Input, Selecting Audio Preset, Selecting White Balance
Two-way functions:
 Pressing the assigned key will active the feature
o When it is enabled, the indicator of the key will illuminate.
o Pressing again will deactivate the feature and the indicator will go out.
FOR EXAMPLE: Scan, WFM, ALM, Layout, HV Delay
Sequential functions:
 Pressing the assigned key will rotate features in sequence.
FOR EXAMPLE: Timecode, Color Channel
o TimeCode will change its state for OFF->LTC->VITC1->VITC2->OFF
o Color Channel will change its state for RGB->R Only->G Only … -> RGB