Manual

Page 22 of 36
Menus and Navigation
To access the menu system Press and Hold the MENU Rotary Encoder for 3 seconds.
 Step through menu items by using the RotoMenu control.
 Choose a submenu or select a menu item by pushing the
 RotoMenu control.
 Return to the previous menu by pressing the F-9 button.
 Exit the main menu by again pressing the F-9 button.
INFO SUBMENU
The INFO Submenu is a read-only display that gives the user information about
the current status of the monitor and selected input signal being viewed.
No adjustment can be made from this submenu.
INPUT SUBMENU
The Input submenu allows the user to select the input from any
of the available sources:
PICTURE SUBMENU
The Picture submenu allows the user to make adjustments to
Brightness, Contrast, Saturation, Sharpness and Gamma.
 Brightness
o Varies between 0 and 100 (50 is standard).
o 50 is default value with standard black level.
o Increasing brightness level allows user to
see BTB (Blacker-than-Black).
 Contrast
o Varies between 0 and 100 (80 is standard).
o 80 is default value with 100% gain of video signal.
 Saturation
o Varies between 0 and 100 (50 is standard).
o 50 is default value with nominal color saturation.
o Setting to 0 should display as monochrome.
o Increasing the value will increase color saturation.
 Sharpness
o Varies between 0 and 100 (50 is standard).
o 0 is default value with no scaling artifact.
 Gamma
o Varies between 1.0 and 3.0 with 0.1 steps.
o If White Balance is set to User Mode, changing gamma will have no effect
Page 15 of 36
On Screen Menu Contents
MODEL NAME OR-901-XDI
INPUT SDI 1
VIDEO FORMAT 1080i / 60
COLOR MATRIX 709
COLOR TEMP D65
3D REVIEW OFF
ANAGLYPH OFF
AUDIO PEAK LOG OFF
AUDIO PHASE MONITOR OFF
SDI ERROR COUNT 0
SDI LEVEL
UNKNOWN
INFO
VERSION 1.2
RETURN
SDI 1
SDI 2
CVBS
Y-C
COMP
INPUT SELECT
HDMI
INPUT
Analog Calibrate >
RETURN
BRIGHT 0~100 [50] is Calibrated Setting
CONTRAST 0~100 [80] is Calibrated Setting
CHROMA 0~100 [50] is Calibrated Setting
GAMMA 1.0 to 3.0 in 0.1 steps [2.2] is Calibrated Setting
PICTURE
RESET TO PICTURE CANCEL / RESET NOW
RETURN
AUTO
RGB
BT. 601
COLOR MATRIX
BT. 709
FALSE COLOR MTF
FALSE COLOR TG
CIE D65
CIE D93
USER
CAL D65 & D93
CAL D65
COLOR TEMP
CAL D93
RED BIAS -128 to 127 [0] is Calibrated Setting
GREEN BIAS -128 to 127 [0] is Calibrated Setting
BLUE BIAS -128 to 127 [0] is Calibrated Setting
RED GAIN 0.500 to 1.992 [x1.00] is Calibrated Setting
GREEN GAIN 0.500 to 1.992 [x1.00] is Calibrated Setting
COLOR
BLUE GAIN 0.500 to 1.992 [x1.00] is Calibrated Setting