Manual

Page 12 of 36





Rear Panel Features
HDMI Output with Active Indicator
HDMI(TYPE-A), Loop through & Cross converted, HDCP enabled output. The Active LED will
illuminate when the output is connected to a valid HDMI input.
GPI Input
RJ-45 connector for 7 user-assignable GPI inputs. Assignable using the on-screen menu.
Audio Input and Output Jacks
3.5mm stereo line level input and outputs for monitoring analog or embedded audio channels. The
desired audio channels are selected in the Audio onscreen menu. The output level is also controlled
through the Audio onscreen menu.
Service Port
Proprietary connection used for firmware upgrades and LCD color balance calibration. An optional
Service Module is required. (Part number OR-SM)
On Air Tally Indicator Storage Area
Storage area for the removable talent On Air Tally.
On Air Tally OFF / DIM / ON Switch
Controls the brightness of the talent On Air Tally and turns off the tally.
External Battery Connector
For use with optional battery mounts.
Page 25 of 36
MARKER CONFIGURATION SUBMENU
Marker:
Use this setting to enable or disable all on-screen markers.
This setting affects the Center marker, Aspect markers, and
Safety marker.
Center Marker:
Use this setting to display a center marker on the
screen.
Aspect Markers:
Use these settings to superimpose one of 6 markers on the screen when in 16:9 mode.
 4:3
 16:9
 1.85:1
 2.35:1
 4:3 and 1.85:1
 4:3 and 2.35:1
Safety Marker:
Use this setting to adjust the safety marker from 80% to 100% (Off) in 1% steps and USER
USER MARKER
 Selecting USER will display the last defined user configured marker.
o To configure a user marker you must have User Marker assigned to one the
nine Function keys.
 Press the assigned Function key to display the User Marker
 Follow the On Screen instructions to adjust the size and placement of
the User Marker.
Cross Hatch:
Uses this to select one of the following grid patterns.
 OFF
 SMALL
 MEDIUM
 LARGE
Marker Mat:
Use this setting to change the format of the marker curtains between Clear, Halftone, or Black.
Line Thickness:
Use this setting to choose the line thickness of the markers from 1, 2, or 3 pixels thick.
Line Type:
Use this setting to select the style of line used for markers between White, Halftone, and Invert.