Operating instructions

7
Rear Panel Features
Component and Composite Input and Output
The V-LCD70XP-HDMI has HD component (YPbPr)
and composite input. There is as an active loop-
through output for each analog input. See page 8 for
supported video formats. The BNC inputs are
internally terminated with 75 ohms.
HDMI Input Connector
Connect HDMI Sources here. Accepted input
formats can be found on page 8.
Power Input
Connect 12VDC to the 4-Pin XLR power input
connector. Power can be supplied from the included
power supply, or from a variety of DC sources
supplying at least 1 Amp at 12 Volts.
IMPORTANT: If using a power source other than the
included power supply, be sure that the polarity of
the DC input is correct:
Pin 1: GND
Pin 2: N/C
Pin 3: N/C
Pin 4: +12VDC
Battery Adapter
The V-LCD70XP-HDMI can be powered from a
variety of batteries. Several user-interchangeable
battery adapters are available. See your dealer, or
www.lcdracks.com
for available adapters.
¼-20 Mounting Hole
Use the ¼-20 mounting hole to attach the monitor to
a camera or variety of mounting devices.