Manual

Page 31 of 39
USER ASSIGN SUBMENU
■ F-1 thru F-7
There are Seven Function Keys and One
Rotary Encoder on the front panel of the OR-
2410. Each of these F-keys may be assigned
to any one of 31 different functions as
required by the job or individual user.
These functions are listed in the USER
ASSIGN section of the Menu Overview
section of this manual.
There are three types of User Assigned Functions:
One-Way Functions
 Pressing the assigned key will activate the feature
o When it is enabled, the indicator of the key will illuminate
o Pressing again will have no effect
FOR EXAMPLE: Selecting an Input, Selecting Audio Preset, Selecting White Balance
Two-Way Functions
 Pressing the assigned key will active the feature
o When it is enabled, the indicator of the key will illuminate.
o Pressing again will deactivate the feature and the indicator will go out.
FOR EXAMPLE: Scan, WFM, ALM, Layout, HV Delay
Sequential Functions
 Pressing the assigned key will rotate features in sequence.
FOR EXAMPLE: Timecode, Color Channel
o TimeCode will change its state for OFF->LTC->VITC1->VITC2->OFF
o Color Channel will change its state for RGB->R Only->G Only … -> RGB