Manual

Page 28 of 39
VECTORSCOPE SUBMENU
■ Layout
Use this menu to choose from several
available preset screen layouts. Choosing
any of the preset layouts will override the
settings in the Vectorscope, Size, and
Position menus.
■ Vectorscope
Use this menu to turn the Vectorscope
display On or Off when in the Normal
mode.
■ Size
Use this menu to choose the size of the Vectorscope display in Normal mode. Choices are Small,
Medium, and Large.
■ Position
Use this menu to select the position you want the Vectorscope display to occupy on the screen
when in the Normal mode. Choices are Left Top, Left Bottom, Right Top, and Right Bottom.
■ Display Type
Use this menu to choose how to display the Vectorscope. The choices are Overlay or Overlap. In
the Overlay mode, the Vectorscope will be semi-transparent and the user will be able to see the
source video through the Vectorscope. In the Overlap mode, the Vectorscope will be Opaque and
will block the source video.
■ Gain
Use this menu to change the gain of the Vectorscope display. Normally, the Vectorscope displays
x1.00. In order to allow a magnified view, the gain is adjustable from x1.00 to x4.98 in .01 steps.
Changing this value has no effect on the source material.