Manual

Page 27 of 39
WAVEFORM SUBMENU
■ Layout:
Use this menu to choose from several available
preset screen layouts. Choosing any of the available
preset layouts will override the settings in the
Waveform, Size and Position menus.
■ Waveform:
Use this menu to turn the Waveform display On or
Off and select between White or Parade modes.
■ Size:
Use this menu to choose the size of the Waveform display in Normal mode. Choices are Small,
Medium, and Large.
■ Position:
Use this menu to select the position you want the Waveform display to occupy on the screen
when in the Normal mode. Choices are Left Top, Left Bottom, Right Top, and Right Bottom.
■ Display Type:
Use this menu to choose how to display the waveform. The choices are Overlay or Overlap. In
the Overlay mode, the waveform will be semi-transparent and the user will be able to see the
source video through the waveform. In the Overlap mode, the waveform will be Opaque and will
block the source video.
■ Y Over Limit:
Use this menu to set where you want the waveform to display Red when the video source
exceeds the limit set. This value is adjustable from -7.3% to 109.1% IRE. This setting is shared
with the ClipGuide Menu.
■ Y Under Limit:
Use this menu to set where you want the waveform to display Red when the video source below
the limit set. This value is adjustable from -7.3% to 109.1% IRE. This setting is shared with the
ClipGuide Menu.
 Limits
o Internally, Y values ranges from 0 to 255.
o -7.3 IRE is equal to 0 in digital.
o 0 IRE is equal to 16 in digital.
o 100 IRE is equal to 235 in digital.
o 109.1 IRE is equal to 255 in digital
■ HISTOGRAM:
Use this menu to turn the Histogram function ON or OFF as well as set the Histogram display
position.