Manual

Page 26 of 39
AUDIO CONFIGURATION SUBMENU
■ Front Volume
Adjusts headphone and speaker volume on the front
panel. This value is adjustable from 0 to 40. Setting to
0 will mute the output.
■ Headroom Start
Adjusts the point at which the level meters will change
color from Green to Yellow. This is normally the level
used for alignment. For digital audio in the US, the
SMPTE standard is -20dBFS = 0VU = +4dBu. The European EBU standard is -18dBFS = 0VU.
Other Alignment standards can be set using this menu.
■ Headroom End
Adjusts the point at which the level meters will change color from Yellow to Red. There is no
official standard to where this point should occur. This is an arbitrary setting to give visual warning
that the program level is peaking near the 0dBFS point at which there are no more bits and
clipping will occur.
■ Left Channel / Right Channel
These menus are used to designate which one of the available 16 audio channels will be
assigned to the Left, Right, or both outputs for listening. For example, the user can choose to
send CH 1 to the left output and CH 2 to the Right output, or the user can assign CH 1 to both
Left and Right for a mono feed.
■ Load CH Preset From >
Use this menu to recall one of the 8 possible memory locations where the user previously stored
channel output assignments. Use of this Load command will override the current channel output
assignments.
■ Save CH Preset To >
Use this menu to select which one of 8 memory locations where the user wants to store the
current channel output assignments.
■ CH Preset
Use this menu to Lock or Unlock the ability to save to the Ch Preset memory locations. This helps
to prevent accidental overwriting of stored presets. When Locked, Ch Presets may still be
recalled.
■ SOURCE
Use this menu to select the source of audio being monitored when the input is selected to SDI1 or
SDI2. The default setting is EMBEDDED but there are times when you might want to listen to
audio connected to the Aux Audio Input on the rear panel.
AUDIO UTILITY SUBMENU
The Audio Utility Submenu contains a subset of
control submenus for the various audio monitoring
tools available.
 LEVEL METER
 AUDIO PEAK LOG
 AUDIO PHASE MONITOR
 AUDIO SPECTRUM
Please refer to the Audio Utility section of the On
Screen Menu Contents section of this manual for
details.