Manual

Page 22 of 39
Menus and Navigation
To access the menu system Press the MENU Button located next to
F7.
Step through menu items by using the RotoMenu (Brightness) control.
 Choose a submenu or select a menu item by pushing the RotoMenu control.
 Return to the previous menu by pressing the Menu button.
 Exit the main menu by again pressing the Menu button.
INFO SUBMENU
The INFO Submenu is a read-only display that gives the user
information about the current status of the monitor and selected
input signal being viewed.
No adjustment can be made from this submenu.
INPUT SUBMENU
The Input submenu allows the user to select the input
from any of the available sources:
PICTURE SUBMENU
The Picture submenu allows the user to make
adjustments to Brightness, Contrast, Saturation,
Sharpness and Gamma.
 Brightness
o Varies between 0 and 100 (50 is
standard).
o 50 is default value with standard
black level.
o Increasing brightness level allows user to see BTB (Blacker-than-Black).
 Contrast
o Varies between 0 and 100 (80 is standard).
o 80 is default value with 100% gain of video signal.
 Saturation
o Varies between 0 and 100 (50 is standard).
o 50 is default value with nominal color saturation.
o Setting to 0 should display as monochrome.
o Increasing the value will increase color saturation.
 Sharpness
o Varies between 0 and 100 (50 is standard).
o 0 is default value with no scaling artifact.
 Gamma
o Varies between 1.0 and 3.0 with 0.1 steps.
o If White Balance is set to User Mode, changing gamma will have no effect.