User Manual

8
Marshall Electronics
Peaking - adds a colored edge to picture details making it easy to identify which areas are in sharpest
focus.
False Color - a method to show each brightness in the picture with a different color. It provides a quick
way to tell if one part of a picture is too bright or too dark.
Exposure - creates “zebra” lines in the brightest areas of the picture. This mimics a feature that is
commonly found in broadcast camera viewnders which provides a quick way to check for over-exposure.
Histogram - is a graphical representation of the tonal range within a picture. This mimics a feature
commonly found in DSLR cameras.
Audio Meter - shows an on-screen bar graph of two audio channels (typically Left and Right) from either an
HDMI or SDI digital source.
Waveform Modes:
Y/Luma – a graphic representation of the brightness from left to right across the picture. This is the most
common setting and is particularly useful for adjusting lenses and lighting.
4. CAMERA AUX & AUDIO
This page offers settings to assist with camera setup, focus and
exposure adjustments. Audio metering can be set here as well.
5. WAVEFORM
The Waveform page offers adjustments for the on-screen
Waveform and Vectorscope displays.
The Waveform page offers adjustments for the on-screen
Waveform and Vectorscope displays in digital input modes only.
ITEMS OPTIONS
Waveform Mode OFF / Y/Luma / YCbCr / RGB / Vector / Default
Waveform Scale Auto / mV / %IRE
Colorize Waveform ON / OFF
Limits ON / OFF
Limit Maximum 0 – 255
Limit Minimum 0 – 254
Vector scope Targets OFF / 75% / 100%
Exit
ITEMS OPTIONS
Peaking ON / OFF
Peaking Color OFF / H&V / H / V
Peaking Level OFF/ Mono / Red / Green / Blue
False Color ON / OFF
Exposure ON / OFF
Exposure Level 0 - 100
Histogram OFF / H&V / H / V
Audio Meter ON / OFF
Exit
Peaking - adds a colored edge to picture details making it easy to