User Manual
1. DC 12V Power adapter
2. CD with remote operation application
3. Operations Manual
11
M-LYNX-702W / Specifications
3. SPECIFICATIONS
4. INCLUDED ACCESSORIES
5. TROUBLESHOOTING
Panel Size 7 inch x 2
Panel Resolution 1280 × 800 pixels
Brightness 400 cd/m
2
Contrast 800: 1
Viewing Angle 178° / 178°(H/V)
Input Voltage DC 12V
Input Signal HDMI, SDI, YPbPr & Video
Power Consumption ≤24W
Operating Temperature -20
0
C~60
0
C
Storage Temperature -30
0
C~70
0
C
Dimension W/H/D 19” x 5” x 1” (482.5×132×25mm)
Weight 5.8lbs (2.65Kg)
1. Power on but no picture:
Check whether the cables are correctly connected. Also, please use the standard power adapter
coming with the product package or other power supply with the correct voltage and pin
conguration.
2. Only black-and-white display:
Check whether the color saturation and brightness are properly set.
If using YPbPr connections, be sure three cables are connected properly
Access the Video menu and make sure Check Field is Off
3. Wrong or abnormal colors:
Check whether the cables are correctly connected. Broken or loose pins of the cables may cause
a bad connection. If using YPbPr connections, check that the source device is set for Component
(YUV) not RGB. Access the CAMERA AUX & AUDIO menu page and check that the False Color
mode is OFF.
4. Picture is “stuck” on screen:
Access the Video menu page and check that IMAGE FREEZE is off.
5. Other problems:
The monitor can be reset to Factory original settings. This is sometimes useful to eliminate the
possibility that an improperly set menu item is interfering with the operation. To reset the monitor,
access the “SETTING” menu page, press the Menu knob then rotate left or right to select “Reset”.
Press the knob once then rotate the knob to cause the unit to reset.