User Manual

Marshall
M-CT710 Camera-Top Monitor Owner’s Manual M-CT710 Camera-Top Monitor Owner’s Manual
6| |7
Marshall
Function
System
Sound
To adjust the volume left and right arrows buttons on the front of the
monitor. Default value is 0.
2. Power input
The monitor can be powered by the enclosed DSLR, Camcorder equivalent
12V power abater or AA batteries or equivalent battery or by a 12V power
adapter. Please note the input polarity is Positive with respect to --○-+,
otherwise will damage the monitor!
3. Operating instruction
3.1 Menu operating instructions
Before setting the menu functions, please make sure the device is
connected correctly. Power switch is to ON position. The monitor
enters into working state. Please dial to OFF position when closing the
unit.
After selecting the optionals, press “►”or “◄” on the unit to conrm, then
using “▲” or “▼” to select or adjust the value of Analog Data. After conrm
the needed adjust parameters, using “►” or “◄” to adjust. If you need to
exit OSD menu, repress “MENU” button.
Brightness
To adjust brightness 0-100. Default value is 50.
Contrast
To adjust contrast 0-100. Default value is 50.
Color
Saturation
To adjust Saturation 0-100. Default value is 50.
Hue
To adjust Hue 0-100. Default value is 50.
Sharpness
To adjust the Sharpness.
Color temperature
To adjust the color temperature.
Pre set 9300, 6500, or User
User-R 0-255 Default value is 128.
User-G 0-255 Default value is 128.
User-B 0-255 Default value is 128.