Owner`s manual

Marshall Electronics
10| |11
M-CT6 Camera-Top Monitor Owner’s Manual
www.LCDracks.com
INCLUDED ACCESSORIES BATTERY COMPATIBILITY
TROUBLESHOOTING
• Power AC adapter
• AV cable
• HDMI-to-HDMI cable
• Mini HDMI-to-HDMI cable
• Remote control
• Camera mount
• Battery
• Battery charger
• Operation manual
• Soft pouch
Image is only showing black and white:
Make sure the level of color saturation and brightness are correct.
The power is on but there is no picture:
Check your cable to make sure both ends are secure. Make sure the
AV or VGA cable is tightly connected from the video out connector or
VGA signal output connector. Make sure you are using the standard
power adapter supplied with the monitor.
The colors are incorrect or abnormal:
If any color is missing, check the cables to make sure they are securely
connected. Broken or loose pins in the cable connector can cause a
bad connection.
The remote control does not work:
Check the battery to make sure the battery is installed properly and that
it is not depleted.
If you are still experiencing problems, contact Marshall Electronics
technical support at:
[phone] or [phone]
This camera-top monitor is compatible with a variety of different DSLR and
camcorder batteries, depending upon which option is purchased:
Compatible DSLR Batteries
Canon BP511
Canon E6
Nikon EL3
Compatible Camcorder Batteries
Canon BP-970G
JVC BN-V438U
Panasonic CGA-D54
Panasonic VW-VBG6
Sony NP-QM91
Sony NP-F970