Owner`s manual

Marshall Electronics
4 | | 5
M-CT6 Camera-Top Monitor Owner’s Manual
www.LCDracks.com
REMOTE CONTROL
CABLES
HDMI cable
mini HDMI-to-HDMI
AV Cable
MENU OPERATION
MUTE
Power ON / OFF
Activate OSD menu
Volume UP / adjust value of setting function
Volume DOWN / adjust value of setting function
Selection key / adjust brightness directly
Selection key / adjust phase directly
Aspect ratio switch (4:3/16:9)
Menu Navigation (Flip UP/DOWN)
Menu Navigation (Flip LEFT/RIGHT)
Input Selection
1. Yellow RCA jack for VIDEO 1 input
2. White RCA jack for AUDIO input
3. Yellow RCA jack for VIDEO 2 input
After connecting power, the unit will be in standby mode, which is indicated
by a red light. Press the button (power) on the unit or on the remote
control, and the screen on the unit will illuminate in blue when the unit is
operational. Pressing the same button again will return the unit to STANDBY
mode. Push the "PC/AV" button on the unit or the remote control to select
the signal input.
You can press or on the unit or on the remote control to select the
items: COLOR ADJUST MENU FUNCTION SOUND
and confi rm by pressing on the remote control or + or - on the unit,
then push on the remote control or + or - on the unit a second time
to adjust the items. Push to exit the OSD after your adjustments are
complete.
1
2
3
and confi rm by pressing on the remote control or
and confi rm by pressing on the remote control or
or
then push on the remote control or
then push on the remote control or
or
to adjust the items. Push to exit the OSD after your adjustments are