User's Manual

www.marshall-usa.com
16 17
Shutter
speed
60/30mode 50/25mode
Iris
21 1/10000 1/10000 0 close
20 1/6000 1/6000 1 F14
19 1/4000 1/3500 2 F11
18 1/3000 1/2500 3 F9.6
17 1/2000 1/1750 4 F8
16 1/1500 1/1250 5 F6.8
15 1/1000 1/1000 6 F5.6
14 1/725 1/600 7 F4.8
13 1/500 1/425 8 F4
12 1/350 1/300 9 F3.4
11 1/250 1/215 10 F2.8
10 1/180 1/150 11 F2.4
9 1/125 1/120 12 F2
8 1/100 1/100 13 F1.6
7 1/90 1/75
6 1/60 1/50
5 1/30 1/25
4 1/15 1/12
3 1/8 1/6
2 1/4 1/3
1 1/2 1/2
0 1/1 1/1
Gain
0 0dB
Gain
8 16dB
1 2dB 9 18dB
2 4dB 10 20dB
3 6dB 11 22dB
4 8dB 12 24dB
5 10dB 13 26dB
6 12dB 14 28dB
7 14dB 15 30dB
IR TRANSFER (IR PASS)
UVC CONTROL
1. Currently the camera support NEC code format. For customization with other codes, please contact us.
sfer function via sending COM command.
3. Get the targeted remote controller point to the camera IR receiver, press keys on the remote controller,
then the camera will output the received IR code via VISCA IN port.
4. IR Transfer output format: XX XX XX XX FF
5. The camera can save all setting, no need to re-set after power circle.
XX XX XX XX: Remote Controller Code FF: End Code
Control Requests Control Selector
1 Brightness Control PU_BRIGHTNESS_CONTROL
2 Contrast Control PU_CONTRAST_CONTROL
3 Hue Control PU_HUE_CONTROL
4 Saturation Control PU_SATURATION_CONTROL
5 Sharpness Control PU_SHARPNESS_CONTROL
6 Gamma Control PU_GAMMA_CONTROL
7 White Balance Temperature Control PU_WHITE_BALANCE_TEMPERATURE_CONTROL
8 Gain Control PU_GAIN_CONTROL
9 Power Line Frequency Control PU_POWER_LINE_FREQUENCY_CONTROL
10 Zoom (Absolute) Control CT_ZOOM_ABSOLUTE_CONTROL
11 Zoom (Relative) Control CT_ZOOM_RELATIVE_CONTROL
12 PanTilt (Absolute) Control CT_PANTILT_ABSOLUTE_CONTROL
13 PanTilt (Relative) Control CT_PANTILT_RELATIVE_CONTROL
CV610-U2 / CV610-UB Operation Manual IR Transfer (IR PASS)