User's Manual

www.marshall-usa.com
10 11
4. All Button Sending Mode: long press (3seconds) the Menu+ number “3” button simultaneously, the remote will
enter all button sending mode.
5. Similar operation for the TV control mode learning.
Part 1 - Camera Return Command
VISCA IN (RS232) PORT
VISCA PROTOCOL
No. Function
1 DTR
2 DSR
3 TXD
4 GND
5 RXD
6 A
7 IR OUT
8 B
VISCA IN &RS485 Connection
Camera VISCA IN RS485
1 DTR
2 DSR
3 TXD
4 GND
5 RXD
6 A(+) TX+
7 IR OUT
8 B(-) TX-
VISCA IN &DB9 Connection
Camera VISCA IN Windows DB-9
1 DTR 6 DSR
2 DSR 4 DTR
3 TXD 2 RXD
4 GND 5 GND
5 RXD 3 TXD
6 A(+)
7 IR OUT
8 B(-)
SERIAL PORT CONFIGURATION:
Parameter Value Parameter Value
Baud rate 2400/9600/115200 Stop Bit 1bit
Start Bit 1 bit Verify Bit None
Date Bit 8 bit
Ack/Completion Message
Command Packet Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
Part 2 - Camera Control Command
Error Messages
Command Packet Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a
command with illegal command parameters is accepted
Command Not
Executable
z0 61 41 FF
Returned when a command cannot be executed due
to current conditions. For example, when commands
controlling the focus manually are received during auto
focus.
Command Funnation Command Packet Note
AddressSet Broadcast 88 30 01 FF Address setting
IF_Clear Broadcast 88 01 00 01 FF I/F Clear
CAM_Power On 8x 01 04 00 02 FF
Power ON/OFF
Off 8x 01 04 00 03 FF
CAM_Zoom
Stop 8x 01 04 07 00 FF
Tele(Standard) 8x 01 04 07 02 FF
Wide(Standard) 8x 01 04 07 03 FF
Tele(Variable) 8x 01 04 07 2p FF
p = 0(low)~7(high)
Wide(Variable) 8x 01 04 07 3p FF
Direct 8x 01 04 47 0p 0q 0r 0s FF
pqrs: Zoom Position
(0(wide) ~0x4000(tele))
CAM_Focus
Stop 8x 01 04 08 00 FF
Far(Standard) 8x 01 04 08 02 FF
Near(Standard) 8x 01 04 08 03 FF
Direct 8x 01 04 48 0p 0q 0r 0s FF pqrs: Focus Position
One Push AF 8x 01 04 18 01 FF
CAM_ZoomFocus Direct
8x 01 04 47 0p 0q 0r 0s
0t 0u 0v 0w FF
pqrs: Zoom Position
(0(wide)~ 0x4000(tele))
tuvw: Focus Position
CAM_WB
Auto 8x 01 04 35 00 FF
Indoor 8x 01 04 35 01 FF
Outdoor 8x 01 04 35 02 FF
OnePush 8x 01 04 35 03 FF
Manual 8x 01 04 35 05 FF
Outdoor Auto 8x 01 04 35 06 FF
Sodium Lamp Auto 8x 01 04 35 07 FF
Sodium Auto 8x 01 04 35 08 FF
CAM_RGain
Reset 8x 01 04 03 00 FF
Manual Control of R GainUp 8x 01 04 03 02 FF
Down 8x 01 04 03 03 FF
Direct 8x 01 04 43 00 00 0p 0q FF pq: R Gain (0~0xFF)
CV610-U2 / CV610-UB Operation Manual VISCA Protocol