User's Manual

1. Secure the CV610-U2-WM to the wall with 4 M4 screws (included).
2. Disconnect all cables from the camera. Align the CV610-U2 camera’s ¼-20UNC tripod screw
hole with the wall mount screw hole. Use the ¼-20UNC screw (included) to secure the camera
onto the wall mount. Reconnect the cables after mounting the camera.
Note: Do not mount the camera upside down, as the image will be displayed upside down.
M4 screws
1/4-20UNC screw
Wall Mount Installation
Tel: [phone] • Fax: [phone]
www.marshall-usa.com
[e-mail]
09182020NB