CV610-U2 CV610-UB Silver/Black All Black Full HD USB 2.0 PTZ Camera Operating Instructions Version V3.
CV610-U2 / CV610-UB Operation Manual Accessories IMPORTANT SAFETY INSTRUCTIONS: Table of Contents • Remove lens cover before plugging camera into power source. • Before starting operation, please fully read and follow all instructions in the manual. For your safety, always keep this manual with the camera for reference. • The camera power input range is 100-240VAC (50-60Hz), ensure the power supply input within this range before powering on. SAFETY GUIDELINES ...........................................
CV610-U2 / CV610-UB Operation Manual QUICK START CV610-U2 / CV610-UB Specifications PRODUCT HIGHLIGHTS 1. REMOVE Lens Cover and check all cable connections to be sure they are all firmly connected before powering on • Compact, ergonomically designed housing perfect for small huddle rooms or locations • Supports advanced Ambarella DSP, 1/2.8 inch 5MP image sensor, and high quality 10X 62.
CV610-U2 / CV610-UB Operation Manual CAMERA INTERFACE IR Remote Controller IR REMOTE CONTROLLER CAM 1 CAM 1 CAM 2 CAM 3 CAM 2 FOCUS CAM 3 CAM 1 CAM 2 CAM 3 LED Function Instruction FOCUS HOME FOCUS Press any button and shows in red color: Current selection is to control CAM1; Press any button and shows in green color: Current selection is to control CAM2; ZOOM HOME Press any button and shows in blue color: Current selection is to control CAM3; MENU HOME CAM1/CAM2/CAM3: ZOOM Long press(
CV610-U2 / CV610-UB Operation Manual CAM 1 CAM 2 IR Remote Controller / OSD menu CAM 3 EXP MODE RETURN AUTO/MANUAL/IRIS/SHUT/BRI. Shutter time: 1/1~1/10K (Valid when EXP MODE set to MANUAL or SHUT) Iris value: 0-13 (Valid when EXP MODE set to MANUAL or IRIS) Gain value: 0dB~15dB (Valid when EXP MODE set to MANUAL) Brightness value: 0-27 (Valid when EXP MODE set to BRI.
CV610-U2 / CV610-UB Operation Manual VISCA Protocol 4. All Button Sending Mode: long press (3seconds) the Menu+ number “3” button simultaneously, the remote will enter all button sending mode. 5. Similar operation for the TV control mode learning. VISCA IN (RS232) PORT 1 2 3 4 5 6 7 8 No.
CV610-U2 / CV610-UB Operation Manual VISCA Protocol Part 2 - Camera Control Command Command CAM_Bgain CAM_AE CAM_Shutter CAM_Iris CAM_Gain CAM_Bright CAM_WDR CAM_BackLight CAM_Aperture CAM_Memory CAM_LR_Reverse CAM_PictureFlip 12 Funnation Command Packet Note Reset 8x 01 04 04 00 FF Manual Control of B Gain Up 8x 01 04 04 02 FF Down 8x 01 04 04 03 FF Direct 8x 01 04 44 00 00 0p 0q FF pq: B Gain (0-0xFF) Full Auto 8x 01 04 39 00 FF Manual Command CAM_3D Noise Reduction Funnati
CV610-U2 / CV610-UB Operation Manual VISCA Protocol VISCA PAN / TILT ABSOLUTE POSITION VALUE Pan Angle CAM_WBModeIng 8x 09 04 35 FF -30 0xFE50 -135 0xF868 0 0x0000 y0 50 01 FF Indoor mode y0 50 02 FF Outdoor mode -90 0xFAF0 30 0x01B0 y0 50 03 FF OnePush mode -45 0xFD78 60 0x0360 y0 50 04 FF ATW 0 0x0000 90 0x510 y0 50 05 FF Manual 45 0x0288 8x 09 04 43 FF y0 50 00 00 0p 0q FF pq: R Gain 8x 09 04 44 FF y0 50 00 00 0p 0q FF pq: B Gain y0 50 00 FF Full Auto y0 50 03 FF
CV610-U2 / CV610-UB Operation Manual Shutter speed Gain 16 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 60/30mode 1/10000 1/6000 1/4000 1/3000 1/2000 1/1500 1/1000 1/725 1/500 1/350 1/250 1/180 1/125 1/100 1/90 1/60 1/30 1/15 1/8 1/4 1/2 1/1 0dB 2dB 4dB 6dB 8dB 10dB 12dB 14dB 50/25mode 1/10000 1/6000 1/3500 1/2500 1/1750 1/1250 1/1000 1/600 1/425 1/300 1/215 1/150 1/120 1/100 1/75 1/50 1/25 1/12 1/6 1/3 1/2 1/1 IR Transfer (IR PASS) IR TRANSFER (IR PASS) Iris 0 1 2 3 4 5
Wall Mount Installation 1. Secure the CV610-U2-WM to the wall with 4 M4 screws (included). M4 screws 2. Disconnect all cables from the camera. Align the CV610-U2 camera’s ¼-20UNC tripod screw hole with the wall mount screw hole. Use the ¼-20UNC screw (included) to secure the camera onto the wall mount. Reconnect the cables after mounting the camera. Note: Do not mount the camera upside down, as the image will be displayed upside down.
