User's Manual

CV503/CV506/CV344/CV346 Manual
www.marshall-usa.com9 10
• MIC / LINE: Select MIC or LINE for the audio input source.
• AUDIO LEVEL: Select this to adjust audio levels manually.
• MIC AT TENUATOR : Audio attenuation can be controlled from this menu to minimize the
audio noise level
1. SAMPLE BITS: Select the bit depth of audio
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
MODE
AUDIO LEVEL
MIC AT TENUATOR
AGC LIMIT
SAMPLE BITS
RETURN
>
>
>
>
>
>
>
>
OFF
0 dB
OFF
24 BITS
MENU AUDIO
7. AUDIO
Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one
sub-mode using the UP or DOWN buttons.
• LENS SHADING: Corrects inconsistent brightness level in the image.
• CONTRAST: Adjust the image contrast level.
• BRIGHTNESS: Adjust the image brightness level.
• SATURATION : Adjust the image saturation level.
• HUE: Adjust the image hue level.
• EDGE ENHANCE: Adjust the image sharpness level.
• AUTO SATURATE : Decrease saturation automatically when noise scene is detected.
• AUTO EDGE: Adjust line sharpness level automatically.
• BLACK WHITE LEVEL: Adjust the image black level value.
• GAMMA CORRECT: Adjust the image output gamma level.
• DNR: Reduces video noise at low ambient light.
Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
LENS SHADING
CONTRAST
BRIGHTNESS
SATURATION
HUE
EDGE ENHANCE
AUTO SATURATE
AUTO EDGE
BLACK WHITE LV
GAMMA CORRECT
DNR
RETURN
>
>
>
>
>
>
>
>
OFF
11
11
10
0
5
MIDDLE
ON
>
DEFAULT
>
MENU IMAGE CONTROL
8. IMAGE CONTROL
Select IMAGE CONTROL using the UP or DOWN button.
You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN
buttons.