Broadcast A / V Division CV503-WP All-Weather HD Miniature Camera User Manual
CV503-WP Manual 1. Menu Structure SETUP SUB MENU SUB MENU ATW Table of Contents ONE PUSH WB CONTROL INDOOR OUTDOOR BLUE Table of Contents 01 1. Menu Structure 02 AGC MAX 2. OSD Joystick and Button 04 SENS UP 3. WB Control 05 4. AE Control 06 5. Day / Night 07 6. Image Control 08 7. Special 09 8. Setup 10 9. Reset 11 10. Exit 12 11.
CV503-WP Manual SETUP SUB MENU SUB MENU 2. OSD Joystick and Button SATURATION 2 U 4 L 1 R 5 D 3 HUE EDGE ENHANCE AUTO SATURATE IMAGE CONTROL 503-WP AUTO EDGE BLACK WHITE LEVEL GAMMA CORRECT DNR DNR MODE DNR LEVEL DZOOM DEFOG RS485 DIS POWER BACKLIGHT SPECIAL BINNING I/O Cable (included in box) for CV503, CV506, CV344, CV346 DEFECT PIXEL 1. 2. 3. 4. 5. DISP FUNCTION WDR FLICKER DETECT PRIVACY SET UP DOWN LEFT RIGHT Used to access the menu and confrim selection.
CV503-WP Manual 3. WB CONTROL 4. AE CONTROL Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT buttons. Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or DOWN buttons. • ATW: Continuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of 1,900°K to 11,000°K.
CV503-WP Manual 6. IMAGE CONTROL 5. DAY / NIGHT Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO, COLOR, and NIGHT using the UP or DOWN buttons. Select IMAGE CONTROL using the UP or DOWN button. You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN buttons. • MODE: Auto, Day, Night • AUTO: Camera will change between day and night mode when the light condition MENU changes. • DAY: Camera will stay on day mode.
CV503-WP Manual 7. SPECIAL 8. SETUP Select SPECIAL using the UP or DOWN button. You can select DEFOG, MOTION DETECT, BACKLIGHT, DEFECT PIXEL, and FLICKER DETECT using the UP or DOWN buttons.
CV503-WP Manual 9. RESET 10. EXIT Select RESET using the UP or DOWN buttons. Select EXIT using the UP or DOWN button. • RESET: Reset the camera settings the factory defaults or user setting value. MENU MENU WB CONTROL AE CONTROL DAY/NIGHT IMAGE CONTROL SPECIAL SETUP RESET EXIT RESET > > > > > > > RESET MODE RESET SAVE AS USER RETURN FACTORY > WB CONTROL AE CONTROL DAY/NIGHT IMAGE CONTROL SPECIAL SETUP RESET EXIT > > > > > > > • SAVE: Exit the setup after saving the value changes.
Warranty 11. TROUBLESHOOTING Before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult with your supplier. Problem Nothing appears on the screen. The picture is not clear. Solution 1. Check that all connected devices are powered on. 2. Confirm that the voltage is correct. 3. Confirm that the power supply provides enough current to power the camera. 4.
