User's Manual

CV420-CS Manual
www.marshall-usa.com9 10
7. IMAGE CONTROL 8. SPECIAL
• CONTRAST: Adjust the image contrast level value
• BRIGHTNESS: Adjust the image brightness level value
• SATURATION : Adjust the image saturation level value
• HUE: Adjust the image hue level value
• EDGE ENHANCE: Adjust the image sharpness level
• AUTO SATURATE : Decrease saturation automatically when noise scene is detected
• AUTO EDGE: Enable or disable auto sharpness control
• BLACK WHITE LV: Adjust the image black & white level value
• GAMMA CORRECT: Adjust the image output gamma level
• DNR: Reduces the video noise at low ambient light
• DZOOM: Digitally zoom the video by the desired ratio
• DEFOG: This feature will help increase visibility in extreme weather conditions, such as fog,
rain or in a very strong luminous intensity
• BINNING: Enable or disable pixel binning
• DEFECT PIXEL: Advanced defective pixel correction menu. Power cycle the camera after
running DPC
• DISP. FUNCTION: Display effect such as freeze mirror, rotation, ands style can be applied
from this menu
• HDR: Enable HDR mode (SDR, PQ, HLG)
1. SDR: Apply Standard Dynamic Range
2. PQ: Apply Perceptual Quantizer
3. HLG: Apply Hybrid Log Gamma
• FLICKER DETECT: Adjust the image sensor frequency to match the power frequency
• PRIVACY: Mask an area you want to hide on the screen by applying the privacy zones
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
WB CONTROL
AE CONTROL
DAY/NIGHT
AUDIO
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
CONTRAST
BRIGHTNESS
SATURATION
HUE
EDGE ENHANCE
AUTO SATURATE
AUTO EDGE
BLACK WHITE LV
GAMMA CORRECT
DNR
RETURN
DZOOM
DEFOG
BINNING
DEFECT PIXEL
DISP. FUNCTION
HDR
FLICKER DEFECT
PRIVACY
RETURN
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
10
10
10
0
5
MIDDLE
ON
>
DEFAULT
>
ON
OFF
OFF
ON >
>
>
ON>
>
>
MENU MENUIMAGE CONTROL SPECIAL
Select IMAGE CONTROL using the UP or DOWN button.
You can select CONTRAST, HUE, and image related menu using the UP or DOWN buttons.
Select SPECIAL using the UP or DOWN button.
You can select BINNING, FREEZE, and HDR using the UP or DOWN buttons.
Select the DNR level from Auto, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.