Broadcast A / V Division CV380-CS True 4k30 Compact Camera User Manual
Table of Contents Table of Contents 01 1. Menu Structure 02 2. OSD Joystick and Button 02 3. WB Control 05 4. AE Control 06 5. Day / Night 07 6. Audio 08 7. Image Control 09 8. Special 10 9. Setup 11 10. Reset 12 11. Exit 13 12.
CV380-CS Manual 1. Menu Structure SETUP WB CONTROL SUB MENU SUB MENU ATW AWB ONE PUSH INDOOR OUTDOOR MANUAL AUTO BLUE RED AGC MAX SENS UP AE BRIGHT FLK CONTROL SHUTTER AGC MAX SHUT FIX AE CONTROL SENS UP AE BRIGHT FLK CONTROL IRIS AGC MAX IRIS FIX SENS UP AE BRIGHT FLK CONTROL AGC AGC FIX MANUAL www.marshall-usa.
SETUP AE CONTROL SUB MENU SUB MENU MANUAL FLK CONTROL DAY DAY/NIGHT NIGHT NIGHT COLOR COLOR BURST MIC/LINE AUDIO AUDIO LEVEL MIC ATTENUATOR SAMPLE BITS LENS SHADING CONTRAST BRIGHTNESS SATURATION HUE IMAGE CONTROL EDGE ENHANCE AUTO SATURATE AUTO EDGE BLACK LEVEL GAMMA CORRECT DNR DZOOM DEFOG DIS SPECIAL BACKLIGHT BINNING DEFECT PIXEL DISP FUNCTION FLICKER DETECT 3 DNR MODE DNR LEVEL
CV380-CS Manual SETUP SUB MENU SPECIAL PRIVACY CAM TITLE SUB MENU RS-485/ID COMMUNICATION SETUP SYSTEM INFO OUTPUT FORMAT RESET EXIT USER/FACTORY 2. OSD Joystick and Button LINE IN MIC IN U R L D I/O Cable for CV380-CS SET UP DOWN LEFT RIGHT CV380-CS Used to access the menu and confirm selection. Used to move the cursor up. Used to move the cursor down Used to move the cursor to left and change the value. Used to move the cursor to right and change the value.
3. WB CONTROL Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT buttons. • AUTO: Controls the automatic adjustment of the light source’s color temperature from 3,000°K ~ 8,000°K. • ATW: Continuously adjusts camera color balance in accordance with any change in color temperature. Compensates for color temperature changes within the range of 1,900°K to 11,000°K.
CV380-CS Manual 4. AE CONTROL Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or DOWN buttons. MENU WB CONTROL AE CONTROL DAY/NIGHT AUDIO IMAGE CONTROL SPECIAL SETUP RESET EXIT MANUAL > AUTO > > OFF > ON> MODE SHUT FIX IRIS FIX AGC FIX RETURN AE CONTROL AUTO > • AUTO: Adjusts the exposure level automatically. Detailed fine tuning options are available under this menu. • SHUT FIX: Provides more detailed shutter speed options.
5. DAY / NIGHT Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO, COLOR, and NIGHT using the UP or DOWN buttons. MODE: Set camera to either color mode or B&W mode. (Day, Night) DAY: When set to DAY mode, camera stays in color and IR cut filter is engaged. NIGHT: When set to NIGHT mode, camera stays in B&W and IR cut filter is removed. • NIGHT COLOR: When on, camera stays on color mode. Night (B&W) can be selected from this mode.
CV380-CS Manual 6. AUDIO Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one sub-mode using the UP or DOWN buttons. • MIC / LINE: When using audio microphone use MIC mode, when using other audio sources use LINE setting • AUDIO LEVEL: Select this to adjust audio levels manually. • MIC ATTENUATOR: Audio attenuation can be controlled from this menu to minimize the audio noise level 1.
7. IMAGE CONTROL Select IMAGE CONTROL using the UP or DOWN button. You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN buttons. MENU WB CONTROL AE CONTROL DAY/NIGHT AUDIO IMAGE CONTROL SPECIAL SETUP RESET EXIT MANUAL > AUTO > > OFF > ON> IMAGE CONTROL OFF LENS SHADING 10 CONTRAST 10 BRIGHTNESS 10 SATURATION 0 HUE 5 EDGE ENHANCE MIDDLE AUTO SATURATE 0 BLACK LEVEL DEFAULT GAMMA CORRECT DNR > RETURN • LENS SHADING: Corrects inconsistent brightness level in the image.
CV380-CS Manual 8. SPECIAL Select SPECIAL using the UP or DOWN button. You can select DEFOG, MOTION DETECT, BACKLIGHT, DEFECT PIXEL, and FLICKER DETECT using the UP or DOWN buttons. MENU WB CONTROL AE CONTROL DAY/NIGHT AUDIO IMAGE CONTROL SPECIAL SETUP RESET EXIT SPECIAL MANUAL > AUTO > > OFF > ON> DZOOM DEFOG DWDR MOTION DETECT BLACKLIGHT BINNING DEFECT PIXEL DISP FUNCTION FLICKER DETECT PRIVACY RETURN ON OFF OFF OFF OFF OFF ON> > ON> > > • DZOOM: Digitally zoom the video by the desired ratio.
9. SETUP CAMERA setup can be adjusted from this menu. You can select CAMERA ID, Communication, System Info, and Output Format using the UP or DOWN buttons. MENU WB CONTROL AE CONTROL DAY/NIGHT AUDIO IMAGE CONTROL SPECIAL SETUP RESET EXIT SETUP MANUAL > AUTO > > OFF O ON> CAM TITLE COMMUNICATION SYSTEM INFO OUTPUT FORMAT RETURN • CAM TITLE: Camera title can be turned ON or OFF. • COMMUNICATION: VISCA communication can be adjusted. 1. CAM ID: Camera ID can be setup. (0~7) 2.
CV380-CS Manual 10. RESET Select RESET using the UP or DOWN buttons. • RESET: Reset the camera settings the factory defaults or user setting value. MENU WB CONTROL AE CONTROL DAY/NIGHT AUDIO IMAGE CONTROL SPECIAL SETUP RESET EXIT RESET MANUAL > AUTO> > > OFF > ON> RESET MODE RESET SAVE AS USER RETURN FACTORY > • ON: Set the camera setting to either “FACTORY” or “USER” of “CHANGE” menu. Make sure to select the right mode from “CHANGE” before defaulting the camera.
11. EXIT Select EXIT using the UP or DOWN button. MENU WB CONTROL AE CONTROL DAY/NIGHT AUDIO IMAGE CONTROL SPECIAL SETUP RESET EXIT MANUAL > AUTO > > OFF > ON> • SAVE: Exit the setup after saving the value changes.
CV380-CS Manual 12. TROUBLESHOOTING Before sending the camera for repair, please check below to make sure that the camera is installed correctly. If it still does not perform adequately, please consult with your supplier. Problem Nothing appears on the screen. Solutions a. Check that all connected devices are powered on. b. Confirm that the voltage is correct. c. Confirm that the power supply provides enough current to power the camera. d. Check that all video cables are correctly connected.
Warranty Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
