User's Manual

CV355-30X-IP Manual

www.marshall-usa.com9 10

4. Network Function Settings

4.1 Web System Requirements

4.1.1 Web Browser :

• Internet Explorer 11 or above

• FireFox 66.0.3 or above

• Chrome 73 or above

• Edge 42.17134 or above

• Safari 12.1 or above

4.2 Connecting Camera to Network

4.2.1 Connecting to Internet

Two common connection methods are shown below

1. Connecting via switch or router

2. If the camera is connected to the computer directly, the computer IP address must be

modiﬁed to have the same network segment as the camera

For example, the factory-preset default IP address of CV355-30X-IP is 192.168.100.100. The

computer IP address must be set with the same subnet, such as 192.168.100.101, so that the

computer can be connected correctly with the camera

• Connection Diagram

• Change network settings

4.2.2 Using Marshall VMS Software to View the Images

• The CV355-30X-IP DHCP initial setting is ON. If it is connected to the local area network (LAN),

the camera IP can be retrieved via the following methods

• Install Marshall VMS software (Please download from the Marshall ofﬁcial website, www.

marshall-usa.com)

• Open Marshall VMS software

• Search for the camera: Press [automatically search for the device] button to locate the

CV355-30X-IP camera

• Click CV355-30X-IP in the list and start operation after connecting to network

Note: When using automatic search, the camera and computer must be in the same network

segment, e.g.: 192.168.4.X

Cat6 network cable

CV355-30X-IP

Computer