User's Manual

CV355-30X-IP Manual
www.marshall-usa.com21 22
4.3.10 Network Settings 4.3.11 Maintenance and Updating Firmware
4.3.12 Incident/Error Logs
1
2
3
4
5
6
7
No. Item. Function Descriptions
1 Network Network setting of camera. Change of setting is available only when DHCP function is
closed.
2 RTMP Setting Copy the RTMP web address provided by the RTMP service platform and paste it to the
RTMP connection address to publish the camera images on the RTMP service platform
3 RTSP Setting To upload to YouTube for live streaming, the audio function must be turned on first
4 MPEG-TS Setting Set MPEG-TS format
1. Port must be set in the range above 1024 with a maximum value of 9999
The following port has been used by the camera. Setting of the port may not connect
correctly
8554, 8556, 8557, 8080, 9090, 1935
5 SRT Setting 1. Set the field of SRT and then check the item to open STR streaming. After the SRT
streaming is opened, it will be connected automatically upon startup
2. The port number must be set in the range above 1024 with a maximum value of 9999.
The following port has been used by the camera. Setting of the port may not connect
correctly. 8554, 8556, 8557, 8080,9090,1935
3. Delay time is for 20 to 8000 microseconds. The default value is 120 microseconds
6 SNTP Setting Set SNTP Server IP
7 Port Setting Set HTTP port. The default Port value is 80
<Remark> Change of setting is available only when DHCP function of camera is closed
No. Item. Function Descriptions
1 Firmware Update The camera firmware may be upgraded via web page. For the upgrade method, please
download the FW upgrade manual from Marshall website
No. Item. Function Descriptions
1 Error Logs If the camera encounters errors, an error code log will be established