Broadcast A / V Division CV355-30X-IP 30X IP Zoom Camera User Manual [Firmware Version 0.
CV355-30X-IP Manual Table of Contents Safety Instructions 1. Operation Safety Instructions 02 1.1 1. Package Contents 04 1.2 Do not place the product in tilted position. 2. Function Introduction 04 1.3 Do not place the product on an unstable trolley, stand or table. 2.1 I/O Functions Introduction 04 2.2 Tally Indicator Light Function Description 05 3. Installation Instructions 05 3.1 Installation Basics 05 3.2 Connecting Devices 06 4. Network Function Settings 09 4.
CV355-30X-IP Manual 4. Cleaning 1. Package Contents 4.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners or allow any liquids to enter camera body. CV355-30X-IP Power Cord Power Adapter 5. Remote Control (if applicable) 5.1 Using an incorrect battery type in the remote control may result in breakdown. Follow local instructions on how to dispose of used batteries.
CV355-30X-IP Manual 2.2 Tally Indicator Light Function Description 2.2.1 The tally indicator light function may be enabled through the control of VISCA command. The setting method is as follows: Tally Mode : 8x 01 7E 01 0A 01 0p FF p = 0 : OFF p = 4 : On (half-brightness) p = 5 : On (full-brightness) 3.2 Connecting devices 3.2.1 HDMI connection to display, switch, or media HDMI Cable 3. Installation Instructions 3.1 Installation Basics 3.1.
CV355-30X-IP Manual 3.2.2 Connecting to Internet For details of web page connection setting and description, please refer to Chapter 4 Network Function Settings Description. 3.2.4 • 7 RS-232 serial connection With RS-232 in/out, at most 7 Lumens cameras can be connected. • 3.2.3 Connecting RS-232 RS-232 pin definition description Connecting AUDIO IN www.marshall-usa.
CV355-30X-IP Manual 4. Network Function Settings 4.2.2 Using Marshall VMS Software to View the Images 4.1 Web System Requirements 4.1.1 • • • • • 4.2 Web Browser: Internet Explorer 11 or above FireFox 66.0.3 or above Chrome 73 or above Edge 42.17134 or above Safari 12.1 or above Connecting Camera to Network 4.2.1 Connecting to Internet Two common connection methods are shown below 1. Connecting via switch or router • The CV355-30X-IP DHCP initial setting is ON.
CV355-30X-IP Manual 4.2.3 Using the Browser to View the Images 4.3 Web Page Function Description • 4.3.1 Login Screen Open the browser, and enter the URL of CV355-30X-IP in the IP address bar e.g.: http://192.168.100.100 (default IP address) • Enter administrator’s account and password Account: admin (Default) Password: 9999 (Default) 1 2 3 4 5 No. Item. Function Descriptions 1 Username Enter user account name (default: admin) 2 Password Enter user password (default: 9999) 4.2.
CV355-30X-IP Manual 4.3.2 Viewing In Real Time 4.3.3 Account Management 5 1 1 2 2 3 4 4 3 13 No. Item.
CV355-30X-IP Manual 4.3.4 System Configurations 4.3.5 Video Settings CV355-30X-IP 1 1 2 3 2 4 5 No. Item. Function Descriptions No. Item. Function Descriptions 1 Resolution Set the resolution of the camera, resolutions supported by the camera are as follows: 1 Camera name Modify the camera name • Camera names are limited to 1-12 characters • Please use a camera name by mixing uppercase and lowercase letters and numbers.
CV355-30X-IP Manual 4.3.6 Camera Settings 4.3.7 Picture Settings 1 1 2 3 4 2 3 4 5 5 6 7 8 No. Item. Function Descriptions 1 Zoom ratio Adjust the zoom-in or zoom-out ratio via scroll bar 2 Exposure • • • • • • 3 White balance • • • 4 5 17 Focus MIRROR • • Mode: Select exposure mode (Automatic/Shutter Priority/Aperture Priority/Manual ) Exposure Comp.
CV355-30X-IP Manual 4.3.8 Camera Settings 4.3.9 Time Settings 1 1 2 2 3 4 19 No. Item. Function Descriptions 1 Open audio Turn on / off sound 2 Soundtrack effect setting Set MIC In / Line In 3 Audio Volume Adjust Volume 4 Encode sample rate Set Encode sample rate • 48 KHz(AAC) • 44.1 KHz(AAC) • 16 KHz(G.711) • 8 KHz(G.711) No. Item.
CV355-30X-IP Manual 4.3.10 Network Settings 4.3.11 Maintenance and Updating Firmware 1 3 4 5 2 6 7 No. Item. Function Descriptions 1 Firmware Update The camera firmware may be upgraded via web page. For the upgrade method, please download the FW upgrade manual from Marshall website 4.3.12 Incident/Error Logs No. Item. Function Descriptions 1 Network Network setting of camera. Change of setting is available only when DHCP function is closed.
CV355-30X-IP Manual 4.3.13 Additional Maintenance Settings 6. Troubleshooting This chapter describes problems you may encounter while using CV355-30X-IP. If you have questions, please refer to related chapters and follow all the suggested solutions. If the problem remains, please contact your distributor or the service center. 1 2 3 No. Problem Solution 1 Boot without power signal 1. 2. Make sure you have plugged in the power cord.
Warranty Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
