Broadcast A / V Division CV226 Lipstick HD Camera 3G/HD-SDI User Manual [Firmware Version 0.
CV226 Manual Table of Contents 1. General Information 1. General Information 02 2. Menu Structure 03 3. WB CONTROL 05 4. AE CONTROL 06 5. BACK LIGHT 07 6. IMAGE STABILIZER 08 7. IMAGE CONTROL 09 8. DISPLAY CONTROL 10 9. RESET 11 10. TROUBLESHOOTING 12 11. WARRANTY 13 Thank you for your purchase of a Marshall Miniature or Compact Camera.
CV226 Manual 2.
CV226 Manual 3. WB CONTROL 4. AE CONTROL Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH, and MANUAL using the LEFT or RIGHT button MENU WB CONTROL AE CONTROL BACK LIGHT IMAGE STABILIZER IMAGE CONTROL DISPLAY CONTROL RESET EXIT ATW OFF WB CONTROL COLOR TEMP MIDDLE RED GAIN 32 BLUE GAIN 32 RETURN ON • AUTO: Controls the automatic adjustment of the light source’s color temperature to 3,000 ~ 8,000°K.
CV226 Manual 5. BACK LIGHT 6. IMAGE STABLIZER Select BACK LIGHT using the UP or DOWN button. You can select the BACK LIGHT, ACE, or ECLIPSE mode from the sub menu. MENU WB CONTROL AE CONTROL BACK LIGHT IMAGE STABILIZER IMAGE CONTROL DISPLAY CONTROL RESET EXIT ATW OFF BACK LIGHT BACK LIGHT WDR ACE LOW ECLIPSE ON RETURN ON • BACK LIGHT: Allows the camera to adjust the exposure of the entire image to properly expose the subject in the foreground.
CV226 Manual 8. DISPLAY CONTROL 7. IMAGE CONTROL Select IMAGE CONTROL using the UP or DOWN button. You can adjust all image related features from the sub menu. MENU WB CONTROL AE CONTROL BACK LIGHT IMAGE STABILIZER IMAGE CONTROL DISPLAY CONTROL RESET EXIT ATW OFF ON IMAGE CONTROL COLOR LEVEL 15 SHARPNESS 10 MIRROR OFF OFF FLIP 1.0X D-ZOOM DEFOG OFF DNR LOW OFF MOTION OFF SHADING 0 BLACK LEVEL 0.55 GAMMA HD1080p60 FRAME RATE RETURN • COLOR LEVEL: Adjust the color level value for a fine color tune.
CV226 Manual 9. RESET 10. TROUBLESHOOTING Select RESET using the UP or DOWN button. You can reset the setting to FACTORY or USER saved settings. Choose ON or CHANGE by using the LEFT or RIGHT button. MENU WB CONTROL AE CONTROL BACK LIGHT IMAGE STABILIZER IMAGE CONTROL DISPLAY CONTROL RESET EXIT RESET ATW RESET MODE SAVE RETURN Problem Solutions Nothing appears on the screen. a. Check that all connected devices are powered on. b. Confirm that the voltage is correct. c.
Warranty Marshall Electronics warranties to the first consumer that this device will, under normal use, be free from defects in workmanship and materials, when received in its original container, for a period of two years from the purchase date. This warranty is extended to the first consumer only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty set forth above.
