Operating instructions

25
Specifications
■
PANEL
Screen Size 24.1” Diagonal
Display Area (h x v) 518.4 x 324.0 mm
Aspect Ratio 16:10 Native
Pixels 1920 x RGB x 1200
Color Depth 8-bit
Viewing Angle (h x v) 178° x 178°
Brightness 400 cd/m
2
Contrast Ratio 1000:1
Pixel Pitch (h x v) 0.270mmx 0.270mm
Burn-In Warning
The 3D-241-HDSDI uses a high quality TFT LCD panel.
However, if a static image is left on the screen for 48
hours, there may be a 10 to 20 minute recovery period
for the panel. During recovery, a very faint image may
be retained on the display. Put up a white curtain for 30
minutes to eliminate the retained image.
■
VIDEO INPUT/OUTPUT
HD-SDI Input / Output
Supports ITU-R BT.656, SMPTE 259M, 292M, 274M
DVI-I Video/VESA input
■
CONNECTORS
HD-SDI Video Input
4 x BNC Female (75 Ω)
HD-SDI Video Output (Active Loop-Through)
4 x BNC Female (75 Ω)
DVI-I Video/VESA input
1 x DVI-I Female connector
Power Input
4-Pin XLR Connector
Tally Hardware Interface
HD-15 Female
RS-422/485 Interface
2 x RJ12 (Modular 6P6C)
■
TALLY HARDWARE INTERFACE (HD-15)
Activation requires contact closure of pin to ground on
the HD-15 connector:
Pin No. Signal
1 Channel 1 Green
2 Channel 1 Red
3 Channel 1 Yellow
4 Ground
5 Channel 4 Green
6 Channel 2 Green
7 Channel 2 Red
8 Channel 2 Yellow
9 Ground
10 Channel 4 Red
11 Channel 3 Green
12 Channel 3 Red
13 Channel 3 Yellow
14 Ground
15 Channel 4 Yellow
■
RS-422/485 SERIAL INTERFACE (RJ12)
Protocols: Image Video, TSL v4.0, MEI
Pin No. Signal
1 Tx-
2 Ground
3 Rx+ (Receive from host)
4 Rx- (Receive from host)
5 N/C
6 Tx+
■
ELECTRICAL
Power Consumption 132 W
Voltage Requirement 24 VDC
V-PS24-7.5 Power Supply:
Input 100V-240V, 2.5A, 50-60Hz
Output 18-24VDC, 7.5A, 150W Max
■
MECHANICAL
Dimensions (w x h x d): 21.86” x 15.09” x 2.21”
Weight (with rack ears): 15.5 lbs
Operating Temperature 32°F to 120°F (0°C to 40°C)
Storage Temperature -4°F to120°F (-20°C to 50°C)
Compliance Œ, FCC-Class A, ANSI-63.4
(Certificates on file)
RoHs Do not dispose. Return to Manufacturer or Authorized Recycle Facility.