Operating instructions

20
When the Tally Source is set to TSL/MEI 422, OSD Tally can be set to Off or IMD:
• Off On-screen tally is disabled
• IMD Red, yellow, and green tally is displayed according the protocol commands. Green, red, and yellow
colors are shown individually on either the bottom left or right of the screen.
■
Audio Monitor
Use the Audio Monitor menu option to enable or disable the audio presence indicator icon. When enabled, this
icon indicates whether embedded audio is present in the HD/SDI video input. A red circle and cross will flash on
the icon if no embedded audio is present.
■
CC Monitor (Closed Captioning)
Use the CC Monitor menu option to enable or disable the Closed Captioning presence indicator icon. When
enabled, this icon indicates the presence of 608 and/or 708 embedded Closed Captioning in the SDI video input.
A green dot indicates the presence of CC Data. A red dot indicates no captioning data.
■
OSD Timeout
Use the OSD Timeout setting to set the amount of time you would like to see the Menu on screen. A value of
None allows the menu to stay on screen until it is manually exited.
Embedded Audio Present
No Embedded Audio
IMD Text
00:00:00:00
RG Mode: both colors activated
(red)
(red)
IMD Text
00:00:00:00
GR Mode: both colors activated
(red)
(red)
No CC Data present
CC
608
708
Both 608 and 708 CC Data present
CC
608
708