Operating instructions

12
To modify an individual channel, select the particular submenu you would like to modify (in this case, the
Monochrome option) by turning your RotoMenu left or right from the screen above.
Your current position in the menu is indicated by the green highlight. When you have highlighted the particular
channel you would like to modify, press the RotoMenu knob. The box you have selected will turn red, indicating
that this channel is now your choice to be modified, as shown below:
To apply a change to the particular channel, turn your RotoMenu left or right after you have selected a channel (the
channel is highlighted in red). A black X will appear in your chosen channel box when your setting is active in the
channel, and the black X will go away when your setting is inactive.
To move away from modifying an individual channel, simply press the RotoMenu button again. When the channel
box is highlighted green again, you will know you are free to access any other channel or option.
Group Changes / Link Option
The RotoMenu also allows for changes to input Channels as a group, known as Group Linking. If a menu item can
be applied to multiple channels, the group link option will be shown as follows:
In this image, the Monochrome option in the Video Config submenu is being accessed. By turning the RotoMenu
left and right, the Back arrow, Group Link icon and each of the four individual channels can be accessed. The
green highlight indicates your current position in the menu. In this case, the current RotoMenu position is over the
Group Link icon.