Technical data

CHAP-04.10 ELECTRICAL POWER DISTRIBUTION, DRIVES, CONTROL &
ILLUMINATION ELECTRICAL
Page 48 of 50
ANNEXURE – E-03
ADDITIONAL POINTS FOR AUTOMATION WITH RESPECT TO GTS
Sl.
No.
GS Clause
Additional Points for Automation
1.
Ch-1, 06.03.01
Drawings of all listed categories (except fabrication drawings)
will be submitted to EMPLOYER in minimum 6 sets.
2.
Ch-1, 06.03.03
Original hardcopy documentation and manuals are to be
supplied, for all relevant hardware, software, network,
technology, etc.
3.
Ch-3(Elect),
1.02.15.01.A.2.0
For all equipment with redundant power supply, supply from two
separate sources will be drawn.
4.
Ch-3 (Elect),
1.01.15.02.A
No mode selection at LCS.
5.
Ch-3 (Elect),
1.02.21.02 (10)
Conduits carrying special cables will be painted, coded, marked
as per plant norms.
6.
Ch-3(Elect),
1.02.15.01.B.16.
0
Provisions to be made for off-line testing of Level-I systems prior
to actual deployment.
7.
Max CAT-6 length of 30m for shop floor installations.
8.
Necessary facility/software will be supplied for remote
management and monitoring of the entire network.
9.
Network teams from multiple switches to be employed for all the
important machines (computers).