Technical data

CHAP-04.10 ELECTRICAL POWER DISTRIBUTION, DRIVES, CONTROL &
ILLUMINATION ELECTRICAL
Page 45 of 50
19.
Ammeters
-DO-
20.
Ammeter selector switch
- DO -
21.
Voltmeter selector switch
- DO -
22.
Control switches
-DO-
23.
Control MCBs
-DO-
24.
Indicating lamps (LED) with holder
- DO -
25.
Busbar support insulators
- DO -
26.
Push buttons switches (start & stop)
-DO-
27.
Contact block (2NO+2NC) for start & stop PB
- DO -
28.
Actuator head for start & stop PB
-DO-
29.
Local-off-Remote selector switch
- DO -
30.
Control switch spring return type
- DO -
IV.
LOCAL CONTROL STATIONS
1.
Push buttons (start)
5% of each type & rating.
(minimum 1 set/No. of each
type & rating)
2.
Push buttons (stop)
- DO -
3.
Contact block (2NO+2NC) for start & stop PB
- DO -
4.
Actuator head for start & stop PB
-DO-
5.
Ammeters
-DO-
V.
MOTORS (OF EACH TYPE & RATING)
1.
Bearing (DE)
5% of each type & rating.
(minimum 1 set/No. of each
type & rating)
2.
Bearing (NDE)
-DO-
3.
Cooling Fan
-DO-
4.
Terminal Block
-DO-
5.
Grease Nipple & Plug, Grease pump with
motorised.
-DO-
VI.
PLC/automation
1.
Digital input module with connection unit if
applicable.
10% of each type & rating.
(minimum 1 set/ No. of each
type & rating)
2.
Digital output module with connection unit if
applicable.
- DO -
3.
Analog input module with connection if
applicable.
- DO -
4.
Analog output module with connection if
applicable.
-DO-
5.
Processor card
-DO-
6.
Power supply unit for PLC
- DO -
7.
Memory board (Part of CPU Board)
- DO -
8.
Communication modules
- DO -
9.
Control modules of any other type
-DO-
10.
Control fuse set consisting of 3 nos.
- DO -
11.
Fan unit
-DO-