Technical data

CHAP-04.10 ELECTRICAL POWER DISTRIBUTION, DRIVES, CONTROL &
ILLUMINATION ELECTRICAL
Page 43 of 50
 Thumb drives
 Backup Tape for Servers
 Cleaning Tape
 Disk Imaging S/W for Server &clients
10 Nos
20 Nos
2 Nos
1 Set
35.
Ethernet Analyzer
1 Set
36.
Portable Oscilloscope
1 Set
37.
Hydraulic fan puller
1 Set
38.
Box Spanner Set
1 Set
39.
Hydraulic Coupling Puller
1 Set
40.
Hydraulic Bearing Puller
1 Set
41.
Cable Fault Locator Machine
1 Set
42.
Motorized torque range
1 Set
43.
PCB Cutter
1 Set
44.
Motor Checker
1 Set
45.
Current Recording meter
1 Set
46.
1.5 mm/ 2.5 sq.mm Crimping Tool
1 Set
47.
AC/DC Digital tongue testor
1 Set
48.
Welding Transformer
1
49.
Power Hack Saw
2
50.
Grinding machines
2
ANNEXURE – E-02
SCHEDULE OF MINIMUM COMMISSIONING SPARES FOR ELECTRICAL
EQUIPMENT FOR PKG.-064
The Contractor will supply following minimum commissioning spares along with the
main equipment. However, during testing and commissioning of the plant, in case of
requirement of any additional commissioning spares, same will be supplied by
Contractor without any extra cost to the Employer. The Contractor will hand-over /
deliver these spares directly at the Employer's stores. During testing and
commissioning in case of requirement of any commissioning spares, same will be
brought by the Contractor from Employer's stores. All unused commissioning spares
will remain with the Employer.
SL.
NO.
DESCRIPTION
QUANTITY
I.
Transformer