User Manual

11
40974 Rev. 08-25-2015
Cleaning the Tape Path – Figure 6
1. For units with heater, turn the power switch to the off position and unplug the power
cord.
2. Open the top cover.
3. Remove pressure plate.
4. Remove tape from tape path.
5. Using compressed air remove all debris form the tape path.
6. Using a moist cloth wipe down all sheet metal parts within tape path (tape channel,
pressure plate, weighted brush tank cover, and water tank holder) to remove the gum
adhesive buildup.
7. Using compressed air, remove any visible moisture from the tape path or let the machine
air dry.
8. Referring to the tape loading section, place the tape back into the tape path.
9. Place the pressure plate back in the machine. The pressure plate must be loaded so it
touches the pinch roller shaft and the arrow on the pressure plate points toward the front
of the machine.
10. Close the top cover.