User Manual

Marsh
11
Remote Control
1. POWER Press to toggle operate/standby.
2. MUTE Press once for mute, press again to resume the sound.
3. CD/TUNER/LASER/VIDEO/LINE 1/LINE 2/TAPE Press to select program source.
4. L BALANCE R Press L then the balance knob will turn left, press R the knob will turn right.
5. VOLUME
A. When you change the batteries always make sure that the batteries are of the same type. For
example, if the battery type is Alkaline then both batteries should be Alkaline.
B. Do not use an old battery with a new battery.
C. If the remote control will not be used for a long period of time, the battery should be taken out.
Press + to increase the output level, press - to decrease the output level.
SUGGESTIONS AND WARNINGS IN USING REMOTE CONTROL
Marsh
CD
DVD
LINE1 LINE2
TAPE
BALANCE
L
VOL
R
VIDEO
TUNER
POWER
MUTE
RC-1 Remote Control
Marsh Sound Design
1
2
3
3
4
5