Product Brochure

Outdoor Condenser Fan Motors
Ball Bearing - 80°C
MARS 80°C SunSlinger Max totally
enclosed condenser fan
replacement motors are
designed for all major brands of
HVAC equipment applications
in a variety of ambient
conditions. These 48 frame
motors offer the highest
performance and available from
1/6HP thru 3/4HP, 1075 RPM
and 825 RPM, and 208-230V.
Features:
• All angle
• Rheem mounting holes
w/screws installed
• Trane 4.33 bolt circle mounting
holes with self tapping screws
• Thru bolt or belly band mounting
• Water slinger on shaft
• Capacitor requirement noted on
motor label
• Extra set of nuts on mounting studs
Specifications:
• Class “F” insulation
• Single phase, 60 Hz
• 80°C (176˚F) max ambient
• Thermal overload protection
• Fan duty, continuous, air over
• Totally enclosed
• 36 inch leads
• UL Recognized
Reversible Rotation
1075 RPM
20797 1/6 208-230 0.90 1075 5/370 TEAO 6.50 4.25 1/2
20798 1/4 208-230 1.8 1075 5/370 TEAO 6.50 4.72 1/2
20799 1/3 208-230 2.4 1075 7.5/370 TEAO 6.50 5.24 1/2
20790 1/2 208-230 2.6 1075 10/370 TEAO 6.50 5.91 1/2
20791 3/4 208-230 4.5 1075 10/370 TEAO 6.50 6.50 1/2
825 RPM
20492 1/8 208-230 0.75 825 5/370 TEAO 6.50 4.41 1/2
20493 1/6 208-230 0.80 825 5/370 TEAO 6.50 4.53 1/2
20494 1/4 208-230 1.8 825 5/370 TEAO 6.50 4.92 1/2
20495 1/3 208-230 1.9 825 7.5/370 TEAO 6.50 5.31 1/2
20796 1/2 208-230 2.8 825 12.5/370 TEAO 7.00 6.42 1/2
MARS
NO.
HP VOLTS AMPS RPM
CAP
REQ.
ENCL.
DIMENSIONS
A B C
Outdoor Condenser Fan Motors
Ball Bearing - 70°C
MARS 70°C SunSlinger totally
enclosed condenser fan motors
are designed for either vertical
shaft-up or shaft-down
applications in a variety of
ambient conditions. Shell and
end shields are enclosed for
weather protection. A weep
hole is provided in each end
shield to allow condensate to
drain. All of these motors are
suitable for air conditioning or
heat pump applications.
Features:
• All angle
• Rheem mounting holes
w/screws installed
• Trane 4.33 bolt circle mounting
holes with self tapping screws
• Thru bolt or band mounting
• Water slinger on shaft
• Capacitor requirement noted on
motor label
• Extra set of nuts on
mounting studs
Specifications:
• Class “B” insulation
• Single phase, 60 Hertz
• 70°C/158°F
• Thermal overload protected
• Fan duty, continuous, air over
• Totally enclosed
• 36 inch leads
• UL Recognized
MARS
NO.
HP VOLTS AMPS
CAP
REQ.
ENCL.
DIMENSIONS
A B C
MARS
NO.
HP VOLTS AMPS
CAP
REQ.
ENCL.
DIMENSIONS
A B C
Reversible Rotation – Single Speed
1075 RPM
20727 1/6 208-230 0.90 5/370 TEAO 6.50 4.25 1/2
20728 1/4 208-230 1.8 5/370 TEAO 6.50 4.72 1/2
20729 1/3 208-230 2.4 7.5/370 TEAO 6.50 5.24 1/2
20730 1/2 208-230 3.5 10/370 TEAO 6.50 5.91 1/2
20731 3/4 208-230 5.2 10/370 TEAO 6.50 5.90 1/2
825 RPM
20402 1/8 208-230 0.75 5/370 TEAO 6.50 4.30 1/2
20403 1/6 208-230 1.0 5/370 TEAO 6.50 4.52 1/2
20404 1/4 208-230 2.2 5/370 TEAO 6.50 4.92 1/2
20405 1/3 208-230 1.9 7.5/370 TEAO 6.50 5.31 1/2
20746 1/2 208-230 2.8 12.5/370 TEAO 7.00 5.90 1/2
M–7
Condenser Fan Motors
MARS MOTORS
M–7
®
marsdelivers.com
Toll Free [phone] • Fax [phone]
www.marsdelivers.com
5
1
⁄2 inch dia. 5
1
⁄2 inch dia.