Product Brochure

M–6
MARS Motors
Condenser Fan Motors
MARS MOTORS
M–6
®
marsdelivers.com
Toll Free [phone] • Fax [phone]
www.marsdelivers.com
Outdoor Condenser Fan Motors
Ball Bearing
MARS up/down outdoor condenser
fan motors are designed for either
vertical shaft-up or shaft-down
applications. Shell and end shields
are enclosed for weather protection.
A weep hole is provided in each
end shield to allow condensate to
drain. All of these motors are
suitable for air conditioning or heat
pump applications.
Features:
• All angle
• Rheem mounting holes
w/screws installed
• Water slinger on shaft
• Thru-bolt or band mounting
• Capacitor requirement noted on motor label
• Extra set of nuts & star washers on mounting studs
• Double full flatted shaft
Specifications:
• Class “B” insulation
• Single phase, 60 hertz
• Thermal overload protected
60˚C
MARS
NO.
HP VOLTS AMPS RPM
CAP
REQ.
DIMENSIONS
A B C
MARS
NO.
HP
VOLTS AMPS
RPM
CAP
REQ.
DIMENSIONS
A B
C
1075 RPM
10732 1/6 208-230 0.90 1075 5/370 6.50 4.13 1/2
10733 1/4 208-230 1.8 1075 5/370 6.50 4.25 1/2
10734 1/3 208-230 2.4 1075 7.5/370 6.50 5.10 1/2
10735 1/2 208-230 3.5 1075 10/370 6.50 5.70 1/2
10736 3/4 208-230 5.2 1075 10/370 6.50 5.11 1/2
825 RPM
10203
1/6
208-230
1.0
825
5/370
5.50
4.10
1/2
10204
1/4
208-230
1.6
825
5/370
5.50
4.40
1/2
10205
1/3
208-230
1.9
825
7.5/370 5.50
5.10
1/2
10747
1/2
208-230
2.8
825
12.5/370
6.50
5.70
1/2
Reversible Rotation – Single Speed
Outdoor Condenser Fan Motors -
Shaft Up Only
MARS outdoor condenser fan motors
are designed for shaft up only
used in condenser fan and heat
pump units requiring vertical
shaft up positioning with
“belly band” or extended clamp
screw mounting.
Features:
• Rheem mounting holes
w/screws installed
• For shaft up application
• Reversible rotation
• Water slinger on shaft
• Full flatted six inch
shaft length
• Capacitor requirement noted
on motor label
Specifications:
• Class “B” insulation
• Single phase, 60/50 Hertz
• Automatic thermal overload
protected
• Fan duty, continuous, air over
• 36 inch leads
• Lead end endshield
open construction
• UL Recognized
MARS
NO.
HP VOLTS AMPS ROTATION
CAP
REQ.
BRG.
DIMENSIONS
A B C
10327 1/6 208-230 0.9 REV 5/370 Sleeve 6.0 4.15 1/2
10328 1/4 208-230 1.8 REV 5/370 Sleeve 6.0 4.15 1/2
10329 1/3 208-230 2.4 REV 7.5/370 Sleeve 6.0 5.11 1/2
10330 1/2 208-230 3.5 REV 10/370 Ball 6.0 5.70 1/2
10331 3/4 208-230 5.2 REV 10/370 Sleeve 6.0 6.09 1/2
1075 RPM – Shaft-Up – Single Speed
5
1
⁄2 inch dia. 5
1
⁄2 inch dia.
MARS Three Wire Condenser Fan Motors
Ball Bearing
MARS 3 Wire condenser fan motors replicate OEM wiring for
condenser fan motors speeding installation and saving time.
Condenser fan motors are designed for either shaft-up or shaft-down
applications. End shields are enclosed for weather protection.
A weep hole is provided in each end shield to allow condensate to
drain. All of these motors are suitable for air conditioning or heat
pump applications.
Features:
• All angle, ball bearing
• Rheem mounting holes
w/screws installed
• Water slinger on shaft
• Thru bolt or band mounting
• Capacitor requirement noted
on motor label
• Double full flatted shaft
Specifications:
• Class “B” insulation
• Single phase, 60 Hertz
• Thermal overload protected
• Fan duty, continuous, air over
• Totally enclosed
• 36 inch leads
• UL Recognized
5
1
⁄2 inch dia.
• Totally enclosed
• 36 inch leads
• UL Recognized
Reversible Rotation – Single Speed – 3 Wire
1075 RPM
23728 1/4 208-230 1.8 5/370 TEAO Ball 6.50 4.23 1/2
23729 1/3 208-230 2.4 7.5/370 TEAO Ball 6.50 5.23 1/2
MARS
NO.
HP VOLTS AMPS
CAP
REQ.
ENCL. BRG.
DIMENSIONS
A B C
60˚C
60˚C